I've finally managed to pass some video through my PVR 350' s TV out* so the next step is to try and get X running. For some reason IVTV is not being run while the system boots, so I'm currently doing: # /sbin/depmod -a # /sbin/modprobe ivtv
Then editing my xorg.conf file to give me the appropriate settings and
pressing ctr-alt-backspace to restart X. Unfortunately, and somewhat
predictably, the X Server refuses to restart.
Some information.
I'm using FC3 Following Jarod's guide
I'm in the UK so I'm trying to get the thing to display on a PAL TV
cat /var/log/messages |grep "iTVC15 TV out" returns:
Jan 26 16:22:14 localhost kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer
device
/sbin/lspci -v returns:
02:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2
Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
MY IVTV Init suggests I'm using ivtv: version 0.3.2 (c), which isn't the
one that Jarod says I should be using, although I did install it from the
at-testing rpms. If part of the problem is that I should be using ivtv
0.2.0rc3c then I need to know how to 'downgrade'.
I've also attached my modprobe.conf and xorg.conf files as it's probably in
one of those that the problem lies.
Thanks,
Chris
*If anybody knows why my PVR 350 initialises with the SAA7127 PAL settings
but then switches to NTSC whenever I remove and then reload the SAA7127
module
then I'd be most greatful!
xorg.conf
Description: Binary data
modprobe.conf
Description: Binary data
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
