Top post.. : No Takers for this question?? Please Help me.. :-0 On Wed, 2005-01-26 at 15:28, Ow Mun Heng wrote: > Does anyone on either of this list know how to properly configure LIRC > esp on a laptop? > > I have a D600, and I've verified that the IRDA works under linux. (using > the SIR protocol) > > I've tried to make lirc work (under Gentoo) but am unsure why there's no > response. > > Just to be sure, IRDA is _not_ started when I start LIRCd. > > ls -l /dev/lirc* gets me > srw-rw-rw- 1 root root 0 Jan 26 2005 /dev/lircd > prw-r--r-- 1 root root 0 Jan 26 2005 /dev/lircm > > and also /dev/lirc/0 > > if I start lircd via > > sudo lircd -n -d /dev/lirc/0 on a console and then > I start "irw" on another, pressing _any_ buttons on the remote (any > remote) doesn't give me any output. > > Addition to that, using irrecord also does not work. > > Does anyone has any experience in this?? All the stuffs I've seen on the > internet involves a home-brewed IR receiver. > > If I can't get this to work, Mythtv will be of not much use :-(
-- Ow Mun Heng Gentoo/Linux on DELL D600 1.4Ghz 98% Microsoft(tm) Free!! Neuromancer 18:02:02 up 8:11, 7 users, load average: 0.69, 0.60, 0.69
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
