However, it looks like people on this list have reported the explorer 2000 remote file which is on the lirc page works fine with the 3200.
Have you tried that file?
Have you verified you have light coming out of your IR Blaster? An easy way to do this is with a digital camera or webcam. Hold the short end of the ir emitting unit opposite the end that the cable is entering close to the camera lens and you should "see" the light on the camera screen when you execute the change channel script.
Damon Wanamaker wrote:
The dilemma is there is no config for my SA 3000 at
http://lirc.sourceforge.net/remotes/scientific_atlanta/
And I don't know how to use irrecord. I also wasn't sure if I could use Irrecord given my hardware.
Can anyone help with the syntax/setup I should use?
I believe that lirc0 is the Hauppauge and lirc1 is the Serial IR Blaster.
_________________________________
You need to use irrecord to record your cable box's remote signals. Also, there are several preconfigured codes that can be found on LIRC's website. For your case, go get one of the files from http://lirc.sourceforge.net/remotes/scientific_atlanta/ and copy and paste it into your lircd.conf file.
-Khanh
________________________________
Hello Everyone,
I have a fully functional Mythbox up and running using FC3 (thanks to Jarod's guide). This installation is working flawlessly for my regular cable needs, so I thought now would be a perfect time to try and get the digital cable working as well.
Currently I am using the Hauppage 350 remote for myth and have the following Lirc files installed:
lirc-0.7.0-43.1.rhfc3.at
lirc-lib-0.7.0-43.1.rhfc3.at
lirc-kmdl-2.6.9-1.724_FC3-0.7.0-43.1.rhfc3.at
lirc-devices-0.7.0-1.rhfc3.at
lirc-lib-devel-0.7.0-43.1.rhfc3.at
I have been using the fantastic guide created by Andy (http://comp.uark.edu/~aslong/mythtv.html <http://comp.uark.edu/%7Easlong/mythtv.html> )
I purchased a Serial IR Blaster at www.irblaster.info <http://www.irblaster.info/> (Great quality, fast and friendly service)
I get to the end of the guide and I am not able to change channels on my Scientific Atlanta 3200 Digital Cable box when using the changechannel script.
I am sure this is because I was using the config for the SA 2000 as it was the only one available on the lirc.org site.
My question(s):
- Is there a way I can use irrecord to learn the SA 3200 remote codes and make my own lirc.conf?
- Will the IR Blaster I purchased work on any Digital box or do you need to make sure you purchase an IR blaster that is known to work with your digital cable box in particular?
- Anyone have a pre-made lirc.conf for the SA3200 (wishful thinking)?
You have all been a great help in the past and I am hoping that you can assist me...
(Let me know if you need hardware types/configs/output)
Thanks in advance,
Damon.
------------------------------------------------------------------------
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
