On Wed, 2 Feb 2005 22:36:38 -0500, Mark Clement <[EMAIL PROTECTED]> wrote: > > Hi All, > > Has anyone got the basic (LED/DIODE/RESISTOR) blaster working on a Dishnet > 3000 or 4000 Receiver ? > If so i would like to know what ledxmtd.conf file you are using > > I've have tried all the lirc configs i could find to do with dish with > little luck > I'm able to occasionaly get the receiver to pickup the number '2' but that's > it > This does tell me the setup is working partially - i even put the > oscilloscope to it > and checked for pulses - looks good to me but the receiver doesn't like it > > Is it a timing issue ? > > Any help greatly appreicated > > Markus
Hi Markus, I have a dish 302 and a 2800. Both should use the same lirc.conf file as the 3/4000 receivers. Mine works fine except that sometimes it misses channels in the 130's, I think there's a problem with 3's. I haven't bothered with it much since most of my channels don't seem to have 3's in them. I'm using the standard JVC_RAW conf file for my main receiver and a modified JVC_RAW for my second receiver, set to remote ID 6. Both work except for the noted problem with 3's. --Pete > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
