Why do you have this message? *** * Your system is not capable of displaying the * full framerate at 624x440 resolution. Frames * will be skipped in order to keep the audio and * video in sync.
Also you have Screen0 in Modes "480x480" if you are using NTSC you should set MythTV and *.conf for X to 720x480 resolution. if you are using PAL then 756x480 (I think) I'm not sure but your system is probably trying to stretch the video. ----- Original Message ----- From: Minh Duong <[EMAIL PROTECTED]> Date: Tuesday, February 8, 2005 2:37 am Subject: [mythtv-users] Slow playback in PVR 350 > Hi, I'm using the PVR 350 TV out but when I watch TV, > the playback is slow and choppy. I get this message: > > > *** > * Your system is not capable of displaying the > * full framerate at 624x440 resolution. Frames > * will be skipped in order to keep the audio and > * video in sync. > > Anybody experience this before? > I set MythTV to use the PVR350 decoder in Utilities & > Setting -->Setup --> TV Settings -->Playback but that > didn't solve it. > > Thanks in advance. > > > My xorg.conf: > ------------------------------------------- > # XFree86 4 configuration created by pyxf86config > > Section "ServerLayout" > Identifier "Default Layout" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > > # RgbPath is the location of the RGB database. Note, > this is the name of the > # file minus the extension (like ".txt" or ".db"). > There is normally > # no need to change the default. > # Multiple FontPath entries are allowed (they are > concatenated together) > # By default, Red Hat 6.0 and later now use a font > server independent of > # the X server to render fonts. > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath > "/usr/X11R6/lib/modules/extensions" > ModulePath "/usr/X11R6/lib/modules" > FontPath "unix/:7100" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > # Load "fbdevhw" > Load "glx" > Load "record" > Load "freetype" > Load "type1" > EndSection > > Section "InputDevice" > # Specify which keyboard LEDs can be user-controlled > (eg, with xset(1)) > # Option "Xleds" "1 2 3" > # To disable the XKEYBOARD extension, uncomment > XkbDisable. > # Option "XkbDisable" > # To customise the XKB settings to suit your keyboard, > modify the > # lines below (which are the defaults). For example, > for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can > use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout > setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your > capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > # Or if you just want both to be control, use: > # Option "XkbOptions" "ctrl:nocaps" > # > Identifier "Keyboard0" > Driver "keyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "no" > EndSection > > Section "InputDevice" > > # If the normal CorePointer mouse is not a USB mouse > then > # this input device can be used in AlwaysCore mode to > let you > # also use USB mice at the same time. > Identifier "DevInputMice" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "no" > EndSection > > Section "Monitor" > Identifier "NTSC Monitor" > DisplaySize 558 431 > HorizSync 30-50 > VertRefresh 60.0-60.0 > Option "dpms" > EndSection > > Section "Device" > Identifier "Hauppauge PVR 350 iTVC15 > Framebuffer" > Driver "ivtvdev" > #Driver "fbdev" > > ### change fb0 to whatever your card grabbed > Option "fbdev" "/dev/fb0" > > ### change the BusID to whatever is reported > by lspci, specify it as hex > . > BusID "PCI:01:07:0" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Hauppauge PVR 350 iTVC15 > Framebuffer" > Monitor "NTSC Monitor" > DefaultDepth 24 > DefaultFbbpp 32 > Subsection "Display" > Depth 24 > FbBpp 32 > Modes "480x480" > EndSubsection > EndSection > > Section "DRI" > Group 0 > Mode 0666 > EndSection > > > > > > __________________________________ > Do you Yahoo!? > Yahoo! Mail - now with 250MB free storage. Learn more. > http://info.mail.yahoo.com/mail_250 >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
