Nate Carlson wrote:
I'm still playing with my new Air2PC card; I get rather frequent errors
in recordings with it that I am fairly sure are due to my PCI bus being
overloaded (7 hard drives in software RAID5 plus the Air2PC card don't
seem to be a good combo!). In any case, until I get that problem fixed
up, I'd like to only have the card record programs that I've manually
selected to record on it; is there any way to do that?
Create a different video source, even though it will have the
same channels. Modify the callsigns for the channels on the new
source so they don't match the other source. For example if
channel 3 on source 1 is chanid 1003, KVBC, make 2003, KVBC-D.
Then choose a Channel or Single record rule on KVBC-D for the
shows you want to record on the Air2PC card.
I currently have the card priority for my other cards (3 PVR-250's)
cranked way up so they will grab shows by default, but if all three are
in use, some shows still get sent to the Air2PC card.
While input preference is in mind, you don't need to 'cranked way
up so they will grab shows by default'. you only need to change it
by 1 (one) to break the tie. 1 and 999 are the same in that sense
but the more you add to the input preference, the more it will
distort other priority decisions. I have two card with "1" and
three others at "0" and it makes some amazingly bright decisions.
If you have three levels of preference, 2,1,0 or 1,0,-1 is all
that is needed to make the distinction.
-- bjm
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
