My playback seemed to be quite choppy as well. I have been following and updating CVS on a regular basis, so I don't know why it happened after the .17 release. But what seemed to fix it for me was to set suid on /usr/bin/mythfrontend and /usr/bin/mythtv again, since installing the new version will overwrite them. And make sure in your setup you have the realtime threads option turned on.
~Lou On Sat, 2005-02-12 at 18:52 -0700, Tony Ohmer wrote: > I just upgraded from .16 to .17, I have PVR-350 and things were > running fine .. but now when I watch a recording the playback is > choppy. In the settings it is setup to use the hardware decoder. > > > > I am on version ivtv-0.2.0-64_rc3f.rhfc2.at > > > > But why when I do the dmesg does it show 0.1.10pre2-ck108k? > > > > Here is my dmesg output > > > > > > Any help would be great, the wife is one un-happy camper … > > > > Thanks! > > > > msp3400: Unknown parameter `saa7115' > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.1.10 (0.1.10pre2-ck108k) loading > > ivtv: Linux version: 2.6.8-1.521 686 REGPARM 4KSTACKS gcc-3.3 > > ivtv: In case of problems please include the debug info > > ivtv: between the START INIT IVTV and END INIT IVTV lines when > > ivtv: mailing the ivtv-devel mailinglist. > > ivtv: Autodetected WinTV PVR 350 card > > ivtv: Found an iTVC15 based chip > > ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 5 (level, low) -> IRQ 5 > > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > > msp34xx: ivtv version > > msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, > simpler (G) no-thread mode > > msp34xx: $Id$ compiled on: Sep 9 200417:13:54 > > ivtv: i2c attach [client=MSP3448W-A2,ok] > > tveeprom: Hauppauge: model = 48132, rev = J323, serial# = 7013124 > > tveeprom: tuner = Philips FM1236 (idx = 23, type = 2) > > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > > tveeprom: audio_processor = MSP3440 (type = 11) > > ivtv: i2c attach [client=tveeprom[0],ok] > > ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model > 0x00a93493, Revision 0x00000001 > > ivtv: NTSC tuner detected > > ivtv: Radio detected > > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > > ivtv: i2c attach [client=(tuner unset),ok] > > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > > saa7115: detecting saa7115 client on address 0x42 > > saa7115: writing init values > > ivtv: i2c attach [client=saa7115[0],ok] > > saa7115: status: (1E) 0x09, (1F) 0xc0 > > saa7127: video encoder driver version V 0.3 loaded > > saa7127: Selecting NTSC video Standard > > saa7127: Selecting S-Video+Composite > > saa7127: Turn WSS off > > saa7127: Widescreen Mode 4:3 Full Format > > saa7127: Selecting Normal Encoder Input > > saa7127: Enable Video Output > > ivtv: i2c attach [client=saa7127[0],ok] > > ivtv: Encoder revision: 0x02040024 > > ivtv: Decoder revision: 0x02020023 > > ivtv: Configuring WinTV PVR 350 card with 9 streams > > ivtv: Create DMA stream 0 using 16 131072 byte buffers 2097152 kbytes > total > > ivtv: Registered v4l2 device, streamtype 0 minor 0 > > ivtv: Create DMA stream 1 using 16 131072 byte buffers 2097152 kbytes > total > > ivtv: Registered v4l2 device, streamtype 1 minor 32 > > ivtv: Create stream 2 using 512 4096 byte buffers 2097152 kbytes > total > > ivtv: Registered v4l2 device, streamtype 2 minor 224 > > ivtv: Create DMA stream 3 using 16 131072 byte buffers 2097152 kbytes > total > > ivtv: Registered v4l2 device, streamtype 3 minor 24 > > ivtv: Create stream 4 > > ivtv: Registered v4l2 device, streamtype 4 minor 64 > > ivtv: Create DMA stream 5 using 8 131072 byte buffers 1048576 kbytes > total > > ivtv: Registered v4l2 device, streamtype 5 minor 16 > > ivtv: Create stream 6 using 512 4096 byte buffers 2097152 kbytes > total > > ivtv: Registered v4l2 device, streamtype 6 minor 228 > > ivtv: Create stream 7 > > ivtv: Registered v4l2 device, streamtype 7 minor 232 > > ivtv: Create DMA stream 8 using 8 131072 byte buffers 1048576 kbytes > total > > ivtv: Registered v4l2 device, streamtype 8 minor 48 > > ivtv: Setting Tuner 2 > > tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by > ivtv i2c driver #0 > > ivtv: Setting audio matrix to input 3, output 1 > > ivtv: Switching standard to NTSC. > > saa7115: decoder set norm NTSC > > saa7115: set audio: 0x01 > > saa7127: Setting Encoder Video Standard > > saa7127: Set NTSC Video Mode > > saa7127: Selecting NTSC video Standard > > ivtv: Initialized WinTV PVR 350, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) > > ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and > has 1704960 bytes. > > ivtv-osd: screen coords: [0 0] -> [720 480] > > ivtv-osd: original global alpha = 208 > > ivtv-osd: current OSD state = 39 > > ivtv-osd: new global alpha = 208 (1 255 0) > > ivtv-osd: framebuffer at 0xd5510000, mapped to 0x11852000, size 1350k > > ivtv-osd: mode is 720x480x32, linelength=2880 > > ivtv-osd: fb0: iTVC15 TV out frame buffer device > > > > > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.8.7 - Release Date: 2/10/2005 > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
