Yan, The instructions I have for Alsamixer are as follows:
âYou may also use the alsamixer program to set the volume. First, start alsamixer from the command line. You should start out on the "Master" volume control slider. Use the up and down cursor to set the master volume to around 75%. Next, use the left and right cursor keys to move around on the screen until you find the "Line" slider. Press SPACE to set it as the capture source, set the level to around 50-75% and press "M" to mute it. You can now press ESC to exit out of the alsamixer program. You can also have MythTV manage all volume and mute settings, but this will only affect the "Master" or PCM volume, not the capture volume. See the mythfrontend setup page for options.â On my system, I can mute the Line control, but pressing space to set it as the capture source does nothing. Ralph On Wed, 2005-02-16 at 18:23 -0800, Yan-Fa Li wrote: > Ralph Kitts wrote: > > I am posting this message again because nobody responded the first time. > > It is difficult to believe that no one out there is using a Sound > > Blaster Audigy sound card. > > > > It sounds like you have the Line-In for playback enabled. Mute it. > Leave the Line-In for recording unmuted. I can't verify those settings > because I'm at work right now. Alsa mixer has some F keys you can push > so you can experiment with various settings till you achieve the affect. > > Yan > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
