They are the ones from Jared site as per:

http://wilsonet.com/mythtv/lircd-g3.conf.txt for /etc/lircd.conf
http://wilsonet.com/mythtv/lircrc-haupgrey.txt for /home/mythtv/.mythtv/lircrc



I used his last time for my RH9 Myth server. I just redid the machine under FC3


permissions on the above 2 files are correct both are globally readable and the latter is owned by mythtv user

I was using his and then was going to modify it

I am going to do a test later and run irw as mythtv to see if I get responsed/

I think its a permission problem on /dev/lirc? files


Jim



----- Original Message ----- From: "Andy Long" <[EMAIL PROTECTED]>
To: "Discussion about mythtv" <[email protected]>
Sent: Sunday, February 20, 2005 12:14 PM
Subject: Re: [mythtv-users] hauppauge 350 remote troubles



Please post the contents of both your lircd.conf and lircrc file


On Sat, 19 Feb 2005 03:29:26 -0700, Jim (Mythtv Mailing List) <[EMAIL PROTECTED]> wrote:
I have a file in

/home/mythtv/.lircrc
/home/mythtv/.mythtv/lircrc

they are owned by mythtv user still the remote does not work...

Jim

----- Original Message -----
From: "Harry Orenstein" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, February 19, 2005 8:18 PM
Subject: Re: [mythtv-users] hauppauge 350 remote troubles

> On Friday 18 February 2005 5:49 pm, Jim (Mythtv Mailing List) wrote:
>> I have followed Jareds guide for FC3, and PVR350 I have gotten
>> everything
>> working except my remote.. its the silver remote from the 350
>>
>> I have copied in a new lircd.conf (a few different ones) and tweaked >> the
>> lircrc file in ~/.mythtv
>>
>> and no go.,. Remote works when I test it via irw.
>>
>>
>> Any ideas?
>>
>>
>> Jim
>
> I assume you compiled Myth from source and enabled lirc, right? If > not,
> try
> adding irxevent defs to ~/.lircrc and then run irxevent instead. Also,
> you
> could verify that mplayer or xine (or any other lirc enabled app) works
> with
> your .lircrc to make sure that you're setup correctly. When irw works > it
> only means that your /etc/lircd.conf is working.
>
> -- Harry O.
>


--------------------------------------------------------------------------------

_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users






--------------------------------------------------------------------------------


_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to