|
Hi,
I am running MythTV 0.16 on FC3.
I have recently added a Twinhan VisionPlus 1022
card, which is recognized by FC3 according to messages.
However when I run mythtvsetup, it states that it
does not find any DVB devices.
I have noticed that there were no entries below
/dev/dvb, so I found:
which suggest to use mknod to create devices in
/etc/udev/devices/dvb/adapter0. (audio0, ca0, demux0, dvr0, frontend0, net0,
osd0, video). Do I need the same devices for a VisionPlus board ? And why is the
video device without a trailing 0 while the others contain a zero ?
However I tried to do the same. I now get devices
in /dev/dvb after reboot, but MythTV still does not find any DVB device. What
does MythTV look for ? I would appreciate if somebody could describe briefly how
the driver interface works. I do not understand how MythTV could communicate
with a driver via the /dev/dvb entries, if the driver itself has not created
those entries.
I also read that MythTV 0.17 has better DVB
support, so would there be any chance that my problems disappear after an
upgrade ?
My best guess is that I miss something in my
modprobe.conf. Does anyone run a VisionPlus card on FC3 and want to share his
modprobe.conf ?
Best regards
Niels Dybdahl
|
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
