On Wed, 30 Mar 2005 23:54:02 -0400, Rick <[EMAIL PROTECTED]> wrote: > I've been using a learning remote instead of going the lirc route. > Worked fine on FC1 but on FC3 not so perfect. The keyboard works > perfectly but when using the remote (an HTR-2) only the first key press > of each button works, subsequent presses do nothing although you can see > that the remote is sending. It's got me baffled, tried relearning, > resetting the remote, rebooting but always the same result. (snip)
I had this problem when I moved from Mandrake 9 to FC3. Also had the problem where a keypress on the remote will cause it to repeat until I hit a key on the actual keyboard. I can't tell you how I've fixed it, but I have. I usually hit too many buttons at once to tell you which one did the trick. Try playing around in the KDE control center with the keyboard repeat settings. I think the "restore defaults" button is the key. Try that, then apply, and maybe a reboot. If that doesn't work, just keep trying different things. After about an hour, you'll get it to work and not know why -- it always does for me. :) Good luck. -rac _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
