Hi, I'm having some problems setting up mythtv to work with NTL cable in the UK. I'm using the debian unstable packages of myth 0.17 for now, I'm planning to build 0.18 from source once I've got the basics working.
I've got a 4001 series digital box, which I'm feeding into the PVR350 via composite (for now, I'm hoping to get hold of a scart->svideo cable at some point). Bought a red eye serial cable, but whenever I send the 3 digit channel numbers down to the box, often the last digit doesn't get through, and less often there are problems with the first/second. Checked I'm in RC5 mode (correct for the 4001 series), and emailed the vendor, who basically suggested repositioning the transmitter. :-( Has anyone else had luck with this setup, or suggest where I might be going wrong? Main problem is to do with setting up myth itself. My composite feed provides me with 6 channels. Channels 1 to 5 are analogue feeds for UK channels, and the sixth is for the decoded digital feed from the box itself. What's the best way of setting myth up to ideally allow tuning to 1 to 5, and also allow tuning to 6 whilst using the red eye remote to switch the digital channel? With the PVR350, as it handles both video and audio decoding/output, I have no need for a sound card. Is there a way to persuade mythtv not to try opening /dev/dsp when operating in this mode? Finally(!), with livetv, I've noticed that audio seems to get out of sync when tracking around in the stream, is this a known issue? Thanks in advance. -- Miah Gregory
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
