In 6/9/05, Mercury Morris <[EMAIL PROTECTED]> wrote: > After installing an HD-3000 card, > all of the dvb-apps package, and > the firmware, the azap program > showed that the card is working > with several channels having strong > signals. FE_HAS_LOCK shows up > along with high signal values, error rates > of all zeros. > > What are the next steps to getting > mythtv to tune and record ? > > Using the Guide (EPG) to record from > the HD-3000 results in just snow. So, > I looked in mythtv-setup's Channel Editor > and found that the "Default" was set for all > channels, "Default" being NTSC. Does that > mean going thru the Channel Editor and changing > all the HDTV channels to ATSC? > > Since the system has a working PVR-350, I'd > guess that only the channels numbered like > 2_1, 9_1, 9_2, etc., have to be changed to ATSC. > > What other steps have to be done before mythtv > will recognize and record from the HD-3000 card ? > > Thanks for any insight you might have > > -- > MM > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >
This is DVB, right? There are a couple of threads (including recently - a few dyas ago) that describe various ways to do this. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
