Todd Bowman wrote:
George Nassas wrote:
On 9-Jun-05, at 5:04 PM, Derek Battams wrote:
Is anyone having success controlling the SAE3200 (Rogers Cable) with
an IR
blaster? I'm using the SAE2000 licd.conf file and my streamzap IR
receiver
I can't comment on your setup but I'm controlling a 3200 (also
rogers) with one of these:
http://www.mytvstore.com/product_id_004.html
and it works great. Only problem is telling if the 3200 is on or off,
sometimes I send an unnecessary poweron code and it ends up turning
the box off. Anyway, the myblaster itself works well.
- George
I'm using this on my Scientific Atlanta 3100 and having good results
also. Does anybody know if I can use the litte port marked "IR" on
the back or the USB port on the front to control it?
-Todd
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I have the same box... IR port on the back is an output to drive a
transmitter to control your VCR. The USB port on the front is suitable
for a USB keyboard, but from what I understand it is pretty much useless
as a control device via your PC. You would need a device to go between
tour PC's USB and the cable input to translate as they are both USB
controllers and neither is a device (my terminology may be incorrect,
but you hopefully get the idea). I use an IR emitter off my serial port,
that works fine.
-Bill
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
