On 6/17/05, Chris Baumgartner <[EMAIL PROTECTED]> wrote: > The old module is still hanging around someplace like: > > /lib/modules/2.6.11-1.27_FC3/updates/drivers/media/video > > If it's not there do a: > > locate ivtv.ko > > --Chris > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > [EMAIL PROTECTED] On Behalf Of Ant Daniel > > Sent: Friday, June 17, 2005 3:55 PM > > To: Discussion about mythtv > > Subject: Re: [mythtv-users] PVR 350 and MythVideo > > > > On 6/17/05, Duncan Brown <[EMAIL PROTECTED]> wrote: > > > John Harvey wrote: > > > > > > >Try using the latest ivtv. There were some fixes in > > > >the yuv stuff after 3.6k > > > >John > > > > > > > Well that improved stuff slightly. No green and purple, and the image is > > > steady. However its very pixellated and only shows on the top half of > > > the screen. I also just noticed the fullscreen and zoom commands for > > > mplayer make zero difference to the image if turned on or off. > > > > > > The tuning problem I've just fixed, it was an alias problem from the > > > previous ivtv version > > > > > > > > > _______________________________________________ > > > mythtv-users mailing list > > > [email protected] > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > I've been following the details in this thread, but I have a problem > > that's driving me nuts. > > > > I had originally installed on FC3 following Jarod's excellent guide. > > I decided I'd like to try out the xv stuff so downloaded, built and > > installed the latest driver (0.3.6n) during install it complained > > about the ivtv modules from atrpms, so I moved them out of the way. > > Made & installed utils and copied new ivtvdev_drv.o in X11. Ran > > depmod. > > > > However when I reboot my /var/log/messages keeps telling me that I'm > > running 0.2.0 (rc3j) which was the old version. > > > > I've checked and double checked and can't find the reason, running > > find only shows three locates for the .ko files > > /lib/modules/2.6.11-1.27_FC3/ivtv, my backup of the originals (in my > > home directory) and the build of the new files (also in my home > > directory). > > > > All help much appreciated. > > Ant. > > > > Modinfo tells me it loaded the correct module. > > > > filename: /lib/modules/2.6.11-1.27_FC3/ivtv/ivtv.ko > > ... > > <snip> > > ... > > description: iTVC15_16 driver > > license: GPL > > version: 0.3.6-n > > vermagic: 2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4 > > depends: videodev,i2c-algo-bit > > srcversion: C23E4B42A83C099403B8C53 > > > > > > > > My log output is as follows: > > Jun 17 21:42:40 olympus kernel: ivtv: ==================== START INIT > > IVTV ==================== > > Jun 17 21:42:40 olympus kernel: ivtv: version 0.2.0 (rc3j) loading > > Jun 17 21:42:40 olympus sshd: succeeded > > Jun 17 21:42:40 olympus kernel: ivtv: Linux version: 2.6.11-1.27_FC3 > > 686 REGPARM 4KSTACKS gcc-3.4 > > Jun 17 21:42:40 olympus kernel: ivtv: In case of problems please > > include the debug info > > Jun 17 21:42:40 olympus kernel: ivtv: between the START INIT IVTV and > > END INIT IVTV lines when > > Jun 17 21:42:41 olympus kernel: ivtv: mailing the ivtv-devel mailinglist. > > Jun 17 21:42:41 olympus xinetd: xinetd startup succeeded > > Jun 17 21:42:41 olympus kernel: ivtv: Autodetected WinTV PVR 350 card > > Jun 17 21:42:41 olympus kernel: ivtv: Found an iTVC15 based chip > > Jun 17 21:42:41 olympus kernel: ACPI: PCI Interrupt Link [LNK3] > > enabled at IRQ 12 > > Jun 17 21:42:41 olympus kernel: PCI: setting IRQ 12 as level-triggered > > Jun 17 21:42:41 olympus nfs: Starting NFS services: succeeded > > Jun 17 21:42:41 olympus kernel: ACPI: PCI interrupt 0000:01:06.0[A] -> > > GSI 12 (level, low) -> IRQ 12 > > Jun 17 21:42:41 olympus kernel: ivtv: Unreasonably low latency timer, > > setting to 64 (was 32) > > Jun 17 21:42:41 olympus kernel: ivtv: XXX PCI device: 0x01e0 vendor: > > 0x10de > > Jun 17 21:42:41 olympus nfs: rpc.rquotad startup succeeded > > Jun 17 21:42:41 olympus kernel: tveeprom: Hauppauge: model = 48135, > > rev = J324, serial# = 6814576 > > Jun 17 21:42:42 olympus kernel: tveeprom: tuner = Philips FM1246 (idx > > = 24, type = 1) > > Jun 17 21:42:42 olympus kernel: tveeprom: tuner fmt = PAL(I) (eeprom = > > 0x10, v4l2 = 0x00000010) > > Jun 17 21:42:42 olympus kernel: tveeprom: audio_processor = CS5331 (type = > > 9) > > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=tveeprom[0],ok] > > Jun 17 21:42:42 olympus nfs: rpc.nfsd startup succeeded > > Jun 17 21:42:42 olympus kernel: msp34xx: ivtv version > > Jun 17 21:42:42 olympus kernel: msp34xx: init: chip=MSP3418W-A2, has > > NICAM support, simple (D) mode, simpler (G) no-thread mode > > Jun 17 21:42:42 olympus nfs: rpc.mountd startup succeeded > > Jun 17 21:42:42 olympus kernel: msp34xx: $Id$ compiled on: May 19 2005 > > 04:40:44 > > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=MSP3418W-A2,ok] > > Jun 17 21:42:42 olympus rpcidmapd: rpc.idmapd -SIGHUP succeeded > > Jun 17 21:42:42 olympus kernel: saa7115: starting probe for adapter > > ivtv i2c driver #0 (0x10005) > > Jun 17 21:42:42 olympus kernel: saa7115: detecting saa7115 client on > > address 0x42 > > Jun 17 21:42:42 olympus kernel: saa7115: writing init values > > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=saa7115[0],ok] > > Jun 17 21:42:42 olympus kernel: saa7115: status: (1E) 0x48, (1F) 0xc0 > > Jun 17 21:42:42 olympus kernel: tuner: chip found at addr 0xc2 i2c-bus > > ivtv i2c driver #0 > > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=(tuner unset),ok] > > Jun 17 21:42:42 olympus kernel: saa7127: detecting saa7127 client on > > address 0x88 > > Jun 17 21:42:42 olympus kernel: saa7127: Selecting NTSC video Standard > > Jun 17 21:42:42 olympus kernel: saa7127: Selecting S-Video+Composite > > Jun 17 21:42:42 olympus kernel: saa7127: Turn WSS off > > Jun 17 21:42:42 olympus kernel: saa7127: Widescreen Mode 4:3 Full Format > > Jun 17 21:42:42 olympus kernel: saa7127: Selecting Normal Encoder Input > > Jun 17 21:42:42 olympus kernel: saa7127: Enable Video Output > > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=saa7127[0],ok] > > Jun 17 21:42:42 olympus kernel: ivtv: Tuner Type 1, Tuner formats > > 0x00000010, Radio: yes, Model 0x00a93494, Revision 0x00000001 > > Jun 17 21:42:42 olympus kernel: ivtv: Radio detected > > Jun 17 21:42:42 olympus kernel: ivtv: Encoder revision: 0x02040024 > > Jun 17 21:42:42 olympus xinetd[3509]: xinetd Version 2.3.13 started > > with libwrap loadavg options compiled in. > > Jun 17 21:42:42 olympus kernel: ivtv: Encoder Firmware may be buggy, > > use version 0x02040011 > > Jun 17 21:42:42 olympus xinetd[3509]: Started working: 0 available > > services > > Jun 17 21:42:42 olympus kernel: ivtv: Decoder revision: 0x02020023 > > Jun 17 21:42:42 olympus kernel: ivtv: Configuring WinTV PVR 350 card > > with 9 streams > > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 0 using 256 > > 16384 byte buffers 4194304 kbytes total > > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device, > > streamtype 0 minor 0 > > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 1 > > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device, > > streamtype 1 minor 32 > > Jun 17 21:42:42 olympus kernel: ivtv: Create stream 2 using 40 52224 > > byte buffers 2097152 kbytes total > > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device, > > streamtype 2 minor 224 > > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 3 using 455 > > 4608 byte buffers 2097152 kbytes total > > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device, > > streamtype 3 minor 24 > > Jun 17 21:42:42 olympus kernel: ivtv: Create stream 4 > > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device, > > streamtype 4 minor 64 > > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 5 using 16 > > 65536 byte buffers 1048576 kbytes total > > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device, > > streamtype 5 minor 16 > > Jun 17 21:42:42 olympus kernel: ivtv: Create stream 6 using 1024 2048 > > byte buffers 262144 kbytes total > > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device, > > streamtype 6 minor 228 > > Jun 17 21:42:42 olympus kernel: ivtv: Create stream 7 > > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device, > > streamtype 7 minor 232 > > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 8 > > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device, > > streamtype 8 minor 48 > > Jun 17 21:42:42 olympus kernel: ivtv: Setting Tuner 1 > > Jun 17 21:42:42 olympus kernel: tuner: type set to 1 (Philips PAL_I > > (FI1246 and compatibles)) by ivtv i2c driver #0 > > Jun 17 21:42:42 olympus kernel: saa7115: decoder set input (4) > > Jun 17 21:42:42 olympus kernel: saa7115: now setting Composite input > > Jun 17 21:42:42 olympus kernel: ivtv: Setting audio matrix to input 3, > > output 1 > > Jun 17 21:42:42 olympus kernel: ivtv: Switching standard to PAL. > > Jun 17 21:42:42 olympus kernel: ivtv: ivtv_enc_thread: pid = 551, itv > > = 0xde9650a0 > > Jun 17 21:42:42 olympus kernel: ivtv: ivtv_dec_thread: pid = 552, itv > > = 0xde9650a0 > > Jun 17 21:42:42 olympus kernel: ivtv: i2c client addr: 0x43 not found! > > Jun 17 21:42:42 olympus kernel: saa7115: decoder set norm PAL > > Jun 17 21:42:42 olympus kernel: saa7115: set audio: 0x01 > > Jun 17 21:42:42 olympus kernel: saa7127: Setting Encoder Video Standard > > Jun 17 21:42:43 olympus kernel: saa7127: Set PAL Video Mode > > Jun 17 21:42:43 olympus kernel: saa7127: Selecting PAL video Standard > > Jun 17 21:42:43 olympus kernel: ivtv: Initialized WinTV PVR 350, card #0 > > Jun 17 21:42:43 olympus kernel: ivtv: ==================== END INIT > > IVTV ==================== > > _______________________________________________ > > mythtv-users mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > >
ls /lib/modules/2.6.11-1.27_FC3/updates/drivers/media/video ls: /lib/modules/2.6.11-1.27_FC3/updates/drivers/media/video: No such file or directory that was where the old modules where, but no longer there, locate (after running an updatedb) shows: locate ivtv.ko /lib/modules/2.6.11-1.27_FC3/ivtv/ivtv.ko /home/mythtv/ivtv-0.3.6n/driver/ivtv.ko /home/mythtv/ivtv-0.3.6n/driver/.ivtv.ko.cmd /home/mythtv/olddrivers/ivtv.ko /home/mythtv/olddrivers/tveeprom-ivtv.ko /home/mythtv/olddrivers/msp3400-ivtv.ko /home/mythtv/olddrivers/tuner-ivtv.ko Still no luck :( Ant. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
