Hello everyone. This must just be some silly operator error, because I see that people are happily using the m179. For some reason, when I use mplayer to watch video via the m179, I have a lot of static, but I can see that channel 60 (at least it's the comedy channel) is selected. Changing channels via ptune gives me success messages, but I see no changes in mplayer.
I'm using gentoo and have emerged the latest ivtv driver. When that didn't work, I compiled version 0.3.6s from source. Both exhibit the same behaviour. I'm running an AMD64 system. Has anyone had this issue? I cannot find anything like this in the archives. My dmesg output for loading ivtv is shown below. Because of the warning about a possible corrupt EEPROM, I tried the recommended firmware version. This also had no affect. I'd greatly appreciate any help. ivtv: ==================== START INIT IVTV==================== ivtv: version 0.3.6 (s) loading ivtv: Linux version: 2.6.11-gentoo-r7 SMP gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected AVerMedia M179 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 217 ivtv: XXX PCI device: 0x00e1 vendor: 0x10de tveeprom: Encountered bad packet header [04]. Corrupt or not a Hauppauge eeprom. ivtv: i2c attach [client=tveeprom[50],ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x00, (1F) 0xa5 ivtv: Could not detect tuner standard, defaulting to NTSC. ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring AVerMedia M179 card with 4 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: i2c client id: 0x02 not found! saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Switching standard to NTSC. ivtv: i2c client id: 0x02 not found! saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: Initialized AVerMedia M179, card #0 ivtv: ==================== END INIT IVTV ====================
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
