> > Bryan wrote: >> I did notice that the was this line in the output: >> >> ivtv: Encoder revision: 0x02040024 >> ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!! >> >> How do I change that?? >> >> >> >>>OK, >>>I need some help. I have two 250's and a 500mce in the same machine >>> and I am only getting static. Below is some info that may be of some >>> help. I have searched the mailiing list and have gotten a few ideas >>> for the modprobe.conf file from there but I am just lost. >>> >>>I know there is some little thing that I am missing. Please help as it >>> is much appreciated. >>> >>>rpm info >>>-------- >>>ivtv-0.3.7d-95.rhfc2.at >>>ivtv-firmware-enc-2.04.024-4.at >>>ivtv-firmware-dec-2.02.023-4.at >>>perl-Video-ivtv-0.13-6.rhfc2.at >>>perl-Video-ivtv-0.13-7.rhfc2.at >>>ivtv-firmware-audio-0.0.1-1.at >>>ivtv-kmdl-2.6.10-1.771_FC2-0.3.7d-95.rhfc2.at >>> >>> >>>modprobe.conf >>>-------------- >>># ivtv modules setup >>>alias char-major-81 videodev >>>alias char-major-81-0 ivtv >>>alias char-major-81-1 ivtv >>>alias char-major-81-2 ivtv >>>alias char-major-81-3 ivtv >>>alias tveeprom tveeprom-ivtv >>>alias tuner tuner-ivtv >>>alias msp3400 msp3400-ivtv >>>options cx25480 i2c_enable=-1,-1,1,1 no_black_magic=1 >>>options saa7115 i2c_enable=1,1,-1,-1 >>> >>>ivtv: ==================== START INIT IVTV ==================== >>>ivtv: version 0.2.0 (rc3j) loading >>>ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3 >>> ivtv: In case of problems please include the debug info >>>ivtv: between the START INIT IVTV and END INIT IVTV lines when >>>ivtv: mailing the ivtv-devel mailinglist. >>>ivtv: Autodetected WinTV PVR 250 card >>>ivtv: Found an iTVC15 based chip >>>ivtv: XXX PCI device: 0x2501 vendor: 0x8086 >>>msp34xx: ivtv version >>>ivtv: i2c attach [client=MSP3448W-A2,ok] >>>ivtv: i2c attach [client=tveeprom,ok] >>>ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model >>>0x00a51450, Revision 0x00000000 >>>ivtv: NTSC tuner detected >>>ivtv: Radio detected >>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 >>>ivtv: i2c attach [client=(tuner unset),ok] >>>saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) ivtv: >>> i2c attach [client=saa7115,ok] >>>ivtv: Encoder revision: 0x02040024 >>>ivtv: Encoder Firmware may be buggy, use version 0x02040011 >>>ivtv: Decoder revision: 0x02020023 >>>ivtv: Configuring WinTV PVR 250 card with 5 streams >>>ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes >>> total ivtv: Registered v4l2 device, streamtype 0 minor 0 >>>ivtv: Create DMA stream 1 >>>ivtv: Registered v4l2 device, streamtype 1 minor 32 >>>ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes >>> total ivtv: Registered v4l2 device, streamtype 2 minor 224 >>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes >>> total ivtv: Registered v4l2 device, streamtype 3 minor 24 >>>ivtv: Create stream 4 >>>ivtv: Registered v4l2 device, streamtype 4 minor 64 >>>ivtv: Setting Tuner 2 >>>tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by >>> ivtv i2c driver #0 >>>ivtv: Setting audio matrix to input 3, output 1 >>>ivtv: Switching standard to NTSC. >>>ivtv: ivtv_enc_thread: pid = 3989, itv = 0xe0c591a0 >>>ivtv: Initialized WinTV PVR 250, card #0 >>>ivtv: Autodetected WinTV PVR 250 card >>>ivtv: Found an iTVC16 based chip >>>ivtv: XXX PCI device: 0x2501 vendor: 0x8086 >>>msp34xx: ivtv version >>>ivtv: i2c attach [client=MSP3448W-A2,ok] >>>ivtv: i2c attach [client=tveeprom,ok] >>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 >>>ivtv: i2c attach [client=(tuner unset),ok] >>>saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) ivtv: >>> i2c attach [client=saa7115,ok] >>>ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model >>>0x00891493, Revision 0x00000001 >>>ivtv: NTSC tuner detected >>>ivtv: Radio detected >>>ivtv: Encoder revision: 0x02040024 >>>ivtv: Encoder Firmware may be buggy, use version 0x02040011 >>>ivtv: Configuring WinTV PVR 250 card with 5 streams >>>ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes >>> total ivtv: Registered v4l2 device, streamtype 0 minor 1 >>>ivtv: Create DMA stream 1 >>>ivtv: Registered v4l2 device, streamtype 1 minor 33 >>>ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes >>> total ivtv: Registered v4l2 device, streamtype 2 minor 225 >>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes >>> total ivtv: Registered v4l2 device, streamtype 3 minor 25 >>>ivtv: Create stream 4 >>>ivtv: Registered v4l2 device, streamtype 4 minor 65 >>>ivtv: Setting Tuner 2 >>>tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by >>> ivtv i2c driver #1 >>>ivtv: Setting audio matrix to input 3, output 1 >>>ivtv: Switching standard to NTSC. >>>ivtv: ivtv_enc_thread: pid = 4050, itv = 0xe0c6d640 >>>ivtv: Initialized WinTV PVR 250, card #1 >>>ivtv: Autodetected WinTV PVR 150 card >>>ivtv: Found an iTVC16 based chip >>>ivtv: XXX PCI device: 0x2501 vendor: 0x8086 >>>ivtv: i2c attach [client=wm8775,ok] >>>ivtv: i2c attach [client=tveeprom,ok] >>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 >>>ivtv: i2c attach [client=(tuner unset),ok] >>>saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) ivtv: >>> Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, >>> Revision 0x00000001 >>>ivtv: NTSC tuner detected >>>ivtv: Radio detected >>>ivtv: i2c attach [client=cx25840,ok] >>>ivtv: Encoder revision: 0x02040024 >>>ivtv: Encoder Firmware may be buggy, use version 0x02040011 >>>ivtv: Configuring WinTV PVR 150 card with 5 streams >>>ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes >>> total ivtv: Registered v4l2 device, streamtype 0 minor 2 >>>ivtv: Create DMA stream 1 >>>ivtv: Registered v4l2 device, streamtype 1 minor 34 >>>ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes >>> total ivtv: Registered v4l2 device, streamtype 2 minor 226 >>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes >>> total ivtv: Registered v4l2 device, streamtype 3 minor 26 >>>ivtv: Create stream 4 >>>ivtv: Registered v4l2 device, streamtype 4 minor 66 >>>ivtv: Setting Tuner 57 >>>tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2 >>> ivtv: Switching standard to NTSC. >>>ivtv: Initialized WinTV PVR 150, card #2 >>>ivtv: Autodetected WinTV PVR 150 card >>>ivtv: Found an iTVC16 based chip >>>ivtv: ivtv_enc_thread: pid = 4125, itv = 0xe0c81ae0 >>>ivtv: XXX PCI device: 0x2501 vendor: 0x8086 >>>ivtv: i2c attach [client=wm8775,ok] >>>ivtv: i2c attach [client=tveeprom,ok] >>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #3 >>>ivtv: i2c attach [client=(tuner unset),ok] >>>saa7115: starting probe for adapter ivtv i2c driver #3 (0x10005) ivtv: >>> i2c attach [client=cx25840,ok] >>>ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model >>> 0x00914652, Revision 0x00000001 >>>ivtv: NTSC tuner detected >>>ivtv: Radio detected >>>ivtv: Encoder revision: 0x02040024 >>>ivtv: Encoder Firmware may be buggy, use version 0x02040011 >>>ivtv: Configuring WinTV PVR 150 card with 5 streams >>>ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes >>> total ivtv: Registered v4l2 device, streamtype 0 minor 3 >>>ivtv: Create DMA stream 1 >>>ivtv: Registered v4l2 device, streamtype 1 minor 35 >>>ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes >>> total ivtv: Registered v4l2 device, streamtype 2 minor 227 >>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes >>> total ivtv: Registered v4l2 device, streamtype 3 minor 27 >>>ivtv: Create stream 4 >>>ivtv: Registered v4l2 device, streamtype 4 minor 67 >>>ivtv: Setting Tuner 57 >>>tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #3 >>> ivtv: Switching standard to NTSC. >>>ivtv: Initialized WinTV PVR 150, card #3 >>>ivtv: ==================== END INIT IVTV ==================== >>> >>> >>> >>> >>>_______________________________________________ >>>mythtv-users mailing list >>>[email protected] >>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >> >> >> >> >> _______________________________________________ >> mythtv-users mailing list >> [email protected] >> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >> > you can probably get different firmware from somewhere other than the cd > that is the recommended version, however, this should not cause the > problem. my logs have that line and my myth box has run fine for months. > > make sure your tuner types are right for your tuners and use the > ptune.pl or ptune-ui.pl scripts with mplayer to try tuning channels. > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
In reading the mailing lists, Jarod stated that the tuner should be set to 57 which they are. The 250's are set to 2. Should they be something else? _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
