I think you got it there... I think I have Tuner1 set for /dev/video1. So I have should have 2 Tuner 0's and each should be /dev/tuner0 and /dev/tuner1. I think thats what you're trying to say. I'm not sure how to see if IVTV is getting both cards but I think "dmesg | grep IVTV" should do it and I see:
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
: chip found @ 0xc0 (ivtv i2c driver #0)
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60]
: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: i2c attach to card #0 ok [client=tveeprom, addr=50]
ivtv: This is the first unit of a PVR500
So there's the first card.
: chip found @ 0xc0 (ivtv i2c driver #0)
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60]
: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: i2c attach to card #0 ok [client=tveeprom, addr=50]
ivtv: This is the first unit of a PVR500
So there's the first card.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
: chip found @ 0xc2 (ivtv i2c driver #1)
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
ivtv: i2c attach to card #1 ok [client=tda9887, addr=43]
ivtv: i2c attach to card #1 ok [client=tveeprom, addr=50]
ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44]
ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b]
ivtv: This is the second unit of a PVR500
And here's tuner 2 (although its the same card.)
: chip found @ 0xc2 (ivtv i2c driver #1)
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
ivtv: i2c attach to card #1 ok [client=tda9887, addr=43]
ivtv: i2c attach to card #1 ok [client=tveeprom, addr=50]
ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44]
ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b]
ivtv: This is the second unit of a PVR500
And here's tuner 2 (although its the same card.)
I just have one more question. Even though there is only one coaxial cable coming into the card because theres only 1 cable input, I still can have 2 streams there, right? Or do I somehow need another cable input?
On 9/8/05, Joe Votour <[EMAIL PROTECTED]> wrote:
Check that the ivtv driver detects your PVR-500 as two
PVR-150s. Check that you can get data from both
tuners by doing a "cat /dev/videoX > test.mpg", where
X is first 0, and then 1. If not, then it's an ivtv
problem.
Also, check that in the MythTV setup that you used
"Tuner 0" for both /dev/video0 and /dev/video1.
Despite the fact there is a "Tuner 1" entry, it isn't
used with a PVR-500 (because the PVR-500 is seen by
the ivtv driver as two PVR-150s).
Can't help you with the LiveTV issue. I rarely get
pauses when using it, and when I do, they're once per
half hour, or even once per hour.
-- Joe
--- Steve <[EMAIL PROTECTED]> wrote:
> Hey guys,
> I have the WinTV-PVR-500 from Hauppauge. It's
> supposed to be a dual tuner
> card, and AFAIK Myth is only seeing one tuner. I
> press 'C' because that's
> supposed to change inputs, and it does. But only
> when I'm not recording
> anything. If I am recording Myth complains that all
> available inputs are in
> use.
> Another problem I have is my LiveTV playback
> pauses for about a tenth of a
> second, EVERY second. It's really quite annoying and
> I've messed with quite
> a few settings and still can't seem to fix it. Any
> help is appreciated.
> - Thanks in advance,
> Steve
> > _______________________________________________
> mythtv-users mailing list
> [email protected]
>
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
______________________________________________________
Click here to donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
