On Mon, 2005-09-19 at 07:24, Nick wrote: Thank you for the reply.
> > *IMPORTANT* - the slave backend (SBE) needs to be configured so that > it can connect to the master backend (MBE) and database. > I believe I have that working now. From the log file on the slave backend I get this: 2005-09-19 08:31:01.812 Connecting to master server: 192.168.0.3:6543 2005-09-19 08:31:01.816 Connected successfully I am also getting guide listings now on the slave backend/frontend. > You may need to give access to the SBE machine in MySQL (covered in > the official mythtv docs) if you haven't already, and possibly enable > networking in /etc/my.cnf (the MySQL config file). On the SBE, the > ~/.mythtv/mysql.txt file will contain the settings for connecting to > the database. > Did this. > Getting networking sorted is probably the biggest hurdle. Adding the > extra capture cards on the SBE is pretty easy. > > > 1) Configure the new capture cards on the SBE using mythtvsetup on SBE > Did this. Setup /dev/video0 and /dev/video1 (/dev/video2 is not working yet, this is a different problem with a PVR-500) > 2) You do not create/configure new video sources on the SBE, these are > only ever configured/created on the MBE. Once you can connect to the > MBE/DB MythtV will have access to the video sources available on the > MBE machine. > If this was done on the SBE should this be deleted? On the first couple of passes at this I skipped the step of creating video sources but when I tried to setup the input connections the only option was none. > 3) Enter Input Connections in mythtvsetup on the SBE machine and > connect the correct video sources to the inputs on the new capture > cards you have just configured. > I believe this was done. > 4) Once this is done (and you've made sure the capture cards are > working normally on the SBE), the newly added SBE capture cards should > be available (whilst the SBE is connected to the MBE) and you should > also be able to view program listings on the SBE. > I can see program listings on the SBE. > 5 You can check the system status in MythTV and using mythweb, and > should report the extra capture cards as available, and the machine > they are on. > I only see the two capture cards that are in the master backend. I have tried restarting both backend systems but no change.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
