> System specs: > > Myth 0.18 > Nvidia FX5200, 7667 drivers > 2x HD-3000 capture card > 800x600 through TV-out over s-video. > > I had my Myth system setup and everything was working great...until the > fan on the video card went bad and the system started locking up. > > I was using a Nvidia 6200 AGP video card but I replaced it with a > fanless FX5200 card. After I replaced the video card and rebooted, the > Myth interface looked exactly the same as before, filling the screen > with very little overscan. I then attempted to playback some recorded TV > and discovered that on 16:9 material, at least 10-15% of the picture is > missing on the right side. 4:3 material seems to work fine. > > This did not happen with the 6200 card. I didn't change any settings in > .nvidia-settings-rc or in XF86Config-4, so I don't know what's causing > this. Does anybody have any ideas?
Different video cards sit the screen in slightly different places, it's just a fact of life. You'll need to tinker with the modeline in the XF86Config-4 file, just take it slowly. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
