Jon Vanderwoude wrote:
I've not been able to track down any other cron jobs happening at the
same time, there are none scheduled, and I find nothing in the logs
for cron indicating it starting any jobs.
using version 0.3.7b
Turned off the automatic transcoding just now, and removed all the
jobs from the queue so I'll see if it still has the issue tommorow
morning.
On 9/30/05, Nick <[EMAIL PROTECTED]> wrote:
On 30/09/05, Jon Vanderwoude <[EMAIL PROTECTED]> wrote:
has any one seen a problem like this where ivtv will just stop sending
information to myth?
I've got a pvr 250 and any time I try to record a program that is on
around 1am it dies out. 1am is also when my pvr does it's
transcodeing of all the shows recorded that day...
Myth seems to think that it is still recording, but there is nothing
more being recorded, and I get messages like below in my
/var/log/messages
Sep 29 01:00:02 localhost kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Sep 29 01:00:02 localhost last message repeated 3 times
Sep 29 01:00:02 localhost kernel: saa7115: decoder disable output
Sep 29 01:00:02 localhost kernel: saa7115: decoder enable output
Sep 29 01:00:02 localhost kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Sep 29 01:00:02 localhost last message repeated 3 times
Sep 29 01:00:02 localhost kernel: saa7115: decoder set size
Sep 29 01:00:02 localhost kernel: ivtv: Allocate DMA encoder MPEG
stream: 128 x 32768 buffers (4096KB total)
Sep 29 01:00:02 localhost kernel: ivtv: Setup VBI API header
0x0000bd0d pkts 1 buffs 4 ln 24 sz 1456
Sep 29 01:00:02 localhost kernel: ivtv: Setup VBI start 0x0018ea04
frames 4 fpi 1 lines 0x000000f1
Sep 29 01:00:03 localhost kernel: saa7115: decoder disable output
Sep 29 01:00:03 localhost kernel: saa7115: decoder enable output
Sep 29 01:06:48 localhost kernel: ivtv: ENC: REG_DMAXFER 2 wait failed
now I don't think that transcoding video's is going to suck up enough
of my hard drive bandwidth to cause any problems (segate 200 GB sata
drives software raid 0) but I can't seem to track down why this is
happening.
Any help would be greatly apprecaited.
What version of the ivtv drivers are you using?
Do you have any big cron jobs running at the same time in addition to
the MythTV transcoding?
If you do not run any transcoding jobs, do you see the same problems?
Nick
Is this when your nightly mythfilldatabase runs by chance?
# Endaf
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
