I think I got it fixed, I rolled back one version of firmware (one version back from what the ivtv wiki recommends) and now it seems to be working stably, I watched 4 hours of TV with out any issues so far... so maybe it was just the card not likeing the firmware I provided...
On 10/1/05, Jon Vanderwoude <[EMAIL PROTECTED]> wrote: > nope that runs shortly after midnight... > > > Strangly enough it did it at 8:30 just now... I restarted the machine > at 6:50 (ish) and it was recording from that point until it hung up... > > Just for the sake of curiusity I did "cat /var/log/messages|grep DMAXFER" > > It is happening once aday cause I only tend to reboot it once a day > (tv tuner won't capture until I reboot) But the times seem scattered > out more then I thought. > > Sep 25 22:09:37 localhost kernel: ivtv: ENC: REG_DMAXFER 2 wait failed > Sep 26 00:13:23 localhost kernel: ivtv: ENC: REG_DMAXFER 2 wait failed > Sep 27 01:41:17 localhost kernel: ivtv: ENC: REG_DMAXFER 2 wait failed > Sep 28 01:43:33 localhost kernel: ivtv: ENC: REG_DMAXFER 2 wait failed > Sep 29 01:06:48 localhost kernel: ivtv: ENC: REG_DMAXFER 2 wait failed > Sep 30 20:30:44 localhost kernel: ivtv: ENC: REG_DMAXFER 2 wait failed > > > On 9/30/05, Endaf Jones <[EMAIL PROTECTED]> wrote: > > Jon Vanderwoude wrote: > > > > >I've not been able to track down any other cron jobs happening at the > > >same time, there are none scheduled, and I find nothing in the logs > > >for cron indicating it starting any jobs. > > > > > >using version 0.3.7b > > > > > >Turned off the automatic transcoding just now, and removed all the > > >jobs from the queue so I'll see if it still has the issue tommorow > > >morning. > > > > > >On 9/30/05, Nick <[EMAIL PROTECTED]> wrote: > > > > > > > > >>On 30/09/05, Jon Vanderwoude <[EMAIL PROTECTED]> wrote: > > >> > > >> > > >>>has any one seen a problem like this where ivtv will just stop sending > > >>>information to myth? > > >>> > > >>>I've got a pvr 250 and any time I try to record a program that is on > > >>>around 1am it dies out. 1am is also when my pvr does it's > > >>>transcodeing of all the shows recorded that day... > > >>> > > >>>Myth seems to think that it is still recording, but there is nothing > > >>>more being recorded, and I get messages like below in my > > >>>/var/log/messages > > >>> > > >>>Sep 29 01:00:02 localhost kernel: saa7115: decoder set picture > > >>>bright=127 contrast=63 saturation=63 hue=0 > > >>>Sep 29 01:00:02 localhost last message repeated 3 times > > >>>Sep 29 01:00:02 localhost kernel: saa7115: decoder disable output > > >>>Sep 29 01:00:02 localhost kernel: saa7115: decoder enable output > > >>>Sep 29 01:00:02 localhost kernel: saa7115: decoder set picture > > >>>bright=127 contrast=63 saturation=63 hue=0 > > >>>Sep 29 01:00:02 localhost last message repeated 3 times > > >>>Sep 29 01:00:02 localhost kernel: saa7115: decoder set size > > >>>Sep 29 01:00:02 localhost kernel: ivtv: Allocate DMA encoder MPEG > > >>>stream: 128 x 32768 buffers (4096KB total) > > >>>Sep 29 01:00:02 localhost kernel: ivtv: Setup VBI API header > > >>>0x0000bd0d pkts 1 buffs 4 ln 24 sz 1456 > > >>>Sep 29 01:00:02 localhost kernel: ivtv: Setup VBI start 0x0018ea04 > > >>>frames 4 fpi 1 lines 0x000000f1 > > >>>Sep 29 01:00:03 localhost kernel: saa7115: decoder disable output > > >>>Sep 29 01:00:03 localhost kernel: saa7115: decoder enable output > > >>>Sep 29 01:06:48 localhost kernel: ivtv: ENC: REG_DMAXFER 2 wait failed > > >>> > > >>> > > >>>now I don't think that transcoding video's is going to suck up enough > > >>>of my hard drive bandwidth to cause any problems (segate 200 GB sata > > >>>drives software raid 0) but I can't seem to track down why this is > > >>>happening. > > >>> > > >>>Any help would be greatly apprecaited. > > >>> > > >>> > > >>What version of the ivtv drivers are you using? > > >> > > >>Do you have any big cron jobs running at the same time in addition to > > >>the MythTV transcoding? > > >> > > >>If you do not run any transcoding jobs, do you see the same problems? > > >> > > >>Nick > > >> > > >> > > >> > > > > Is this when your nightly mythfilldatabase runs by chance? > > > > # Endaf > > > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
