-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ben Edwards
>On 10/19/05, David Watkins <[EMAIL PROTECTED]> wrote: ... >> The card type is 'Standard V4L capture card' and can not be changed. What >> should dvd0 show up next to, I have viewo devide /dev/video0. shuld this be >> /dev/dvb0? > Is this still the nova-t card that you mentioned in an earlier post? > I'm pretty sure V4L is wrong for this. As I recall I V4L was the > default, but I was able to scroll through other options and select > dvb. At this point other parts of the window light up, and I was able > to select dvb0 as a particular card. Try deleting all cards and > adding it again. > retried lots of times. Am i missing some packages? If you "ls /dev" do you see /dev/dvb/adapter0/* or /dev/dvb* nodes? If not, then either you (a) do not have a dvb card installed; (b) don't have the dvb driver loaded; or (c) have a problem in /etc/udev/rules. Look for errors logged in /var/log/messages after bootup when the drivers try to load. Myth will only let you select a card type it can find installed in /dev. Richard. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
