Shawn wrote:
John Cartwright wrote:
Hello,
I've got a PVR-150. Sometimes for whatever reason mine gets
recognized as a PVR-250 like your dmesg output says in which case I
lose video. The only solution I've found to this problem has been
to turn the machine completely off for about 10 - 30 seconds and
then try again. I think I read somewhere that the registers in the
tuner take a while to completely clear hence the 10 - 30 second
wait. Hope this helps. Let us know if you find something that
works out better.
This has happened to me also, and performing a cold boot (turning the
machine off and unplugging it for 30 seconds) usually does the trick.
I've read that it has something to do with the firmware.
No, With the HW retaining settings until all kinds of elcos and such
have fully lost power....
Combined with it being very difficult to fully reset the HW (result of
HW design).
Rudy
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
