Mercury Morris wrote:
I have now tried the command "irw", it reports absolutely nothing
during those times when the following line is in effect (in
/etc/modprobe.conf):
options lirc_atiusb unique=1 debug=1 mask=0x0002
I also tried mask=0x00FF - same results, still no "irw" output.
I have also noticed that the codes received, as noted in the system log,
do not match the codes in /etc/lircd.conf. The codes are close,
differing in only one byte-position ( I checked only a few keys: 2 3 4 5).
Does this mean I have to run the "irrecord" command again, and then
ADD the codes generated during that run to the codes already in
/etc/lircd.conf ?
Or, REPLACE the existing /etc/lircd.conf with the newly-generated set
of codes from re-running irrecord ?
If re-running "irrecord" is required every time the unit code ID is
changed, my comment would be that changing IDs is not something I
would want to do every day, or every week, or even every month!
Where did you get your lircd.conf? If you got it from an older version
of LIRC, it won't work...
http://www.gossamer-threads.com/lists/mythtv/users/157990#157990
Mike
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
