|
Hmmm.... I'm using KnoppMyth R5V22 (or do I
have that backwards?), with updated ivtv drivers. Didn't fix.
:( Still really choppy (like 2 frames/sec) with audio if I don't use the
350 Enabled settings, Clean playback but no audio with the setting
enabled.
I'm using a HushPC with it's built-in audio.
I'm starting to wonder the following:
- perhaps the audio out on the 350 isn't working
properly at all, and when I have the 350 hardware playback disable the audio is
being generated by the sound card? But when enabling 350 playback the
audio isn't leaving the card, therefore even though it's looped back to the
sound card I'm not hearing anything? (The audio out is looped through what
I believe to be the line In on the motherboard)
- Perhaps I have the Line In on the motherboard all
wrong? Or is there a setting somewhere to check if it's enabled or
not? (though i've diddled in Linux for years, I've never really messed
with audio, haven't needed it).
*sigh*
Paul
----- Original Message -----
Sent: Wednesday, November 09, 2005 7:58
AM
Subject: Re: [mythtv-users] No Audio on
PVR-350 but available when 350 notselected
On Wednesday 09 November 2005 1:31 am, Paul Fielding
wrote:
> Hi all,
>
> I'm setting up a new MythTV box using a
PVR-350 and KnoppMyth, which I've
> had good luck with before.
This time around, however, I'm having audio
> troubles.
>
>
When myth is installed, after setting up ivtv and editing XF86, etc, I
can
> get MythTV to come up through my PVR-350 to a TV. At
this point *before*
> selecting "use PVR-350" in the
settings, I can get TV to play audio. The
> video is
choppy as all get-out, I'm assuming because it's not using the
>
hardware encoding of the PVR-350 card, but audio works.
>
> Then,
I select the PVR-350 in the settings, and TV becomes smooth as silk,
>
no doubt because hardware encoding is involved. *However*, I no longer
get
> audio. I can revert the setting and get audio back,
but with choppy
> video. I have not changed any other
PVR-350 settings from defaults.
>
> For reference - I've got the
audio out from the 350 patched through the
> audio in and out again from
the sound card. Works on my other MythTV
> box....
>
>
Suggestions?
>
> regards,
>
> Paul
Choppy video
playback:
I had this same problem - it was because XV wasnt enabled...
and XV wasnt
enabled because I was using an old crappy firmware file, once
i upgraded to
the new ivtv firmware, XV worked fine, then playback worked
fine...
(without enabling the 350 TV-Out in the
settings)
James
--
James
Grant
Lightbox Technologies Inc.
http://www.lightbox.org
613-294-3670
_______________________________________________
mythtv-users mailing
list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
|
