On Monday 14 November 2005 14:36, Stuart Auchterlonie wrote: > On Mon, Nov 14, 2005 at 10:26:00AM -0500, Steve Adeff wrote: > > On Monday 14 November 2005 09:45, Stuart Auchterlonie wrote: > > > Careful review of the boot messages, maybe with debug turned on might > > > help. > > > > u know, I looked through them, but as far as I could tell the regular log > > shows the same as well, obviously there must be *something* different, > > but I didn't notice. > > How do I turn debug on? > > need to firstly run modinfo on the modules relevant to your card > that will tell you what parameters the module takes. In general > it will be > > modprobe <module> debug=1 > > or a higher value that 1. > Load them from the most basic one first up to the highest level > you will know what depends on what based on a lsmod.... > > > Stuart
Well, I got it working. How? I dunno... Two things I did, 1) update some DVB stuff from unstable 2) I thought maybe some header files needed by mplayer, etc. are wrong in the kernel headers. What I did was download the 2.0 drivers from pchdtv.com and ran make. I got some weird error, but figured, well I know the drivers I have work, so I ran make install anyway to see if some other changes needed to be made One of these things must have done it (since I forgot to do an mplayer compile after #1). So, now I'm going to reformat to see which step was required. Hopefully its just grabbing some of those files from unstable. Steve _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
