On 11/15/05, Brent Backstrom <[EMAIL PROTECTED]> wrote:
Try using ivtvctl to pick input/output ports. If I'm understanding how the PVR works, the device node is the same for svideo vs composite, but you have to select which one to enable on the card with the ivtvctl command. Another thing to try is to do one-sided tests: either test recording OR video out individually, that should help you narrow down where the problem lies.
- Jeff
Trying to put together a myth installation and ran into a snag.
testing by doing....
dd if=/dev/video of=/dev/video16 bs=64k
I get sound out of the PVR-350 outputs, but no output from the composite video?
Try using ivtvctl to pick input/output ports. If I'm understanding how the PVR works, the device node is the same for svideo vs composite, but you have to select which one to enable on the card with the ivtvctl command. Another thing to try is to do one-sided tests: either test recording OR video out individually, that should help you narrow down where the problem lies.
- Jeff
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
