On 25/11/05, Patrick Beard <[EMAIL PROTECTED]> wrote: > Hi, > I've just install MythTV on my Ubuntu 'Breezy' system. It is doing > everything it should except change channel when watching Live TV. > Instead the mythbackend logs the following; > > 2005-11-25 00:50:08.447 Channel(/dev/video0): CheckChannel failed. > Please verify channel "E6" in the "setup" Channel Editor. > 2005-11-25 00:50:08.448 Channel(/dev/video0): CheckChannel failed. > Please verify channel "E5" in the "setup" Channel Editor. > 2005-11-25 00:50:08.449 Channel(/dev/video0): CheckChannel failed. > Please verify channel "S03" in the "setup" Channel Editor. > 2005-11-25 00:50:08.451 Channel(/dev/video0): CheckChannel failed. > Please verify channel "S02" in the "setup" Channel Editor. > 2005-11-25 00:50:08.452 Channel(/dev/video0): CheckChannel failed. > Please verify channel "S01" in the "setup" Channel Editor. > 2005-11-25 00:50:08.453 Channel(/dev/video0): CheckChannel failed. > Please verify channel "E4" in the "setup" Channel Editor. > 2005-11-25 00:50:08.454 Channel(/dev/video0): CheckChannel failed. > Please verify channel "E3" in the "setup" Channel Editor. > 2005-11-25 00:50:08.455 Channel(/dev/video0): CheckChannel failed. > Please verify channel "E2" in the "setup" Channel Editor. > 2005-11-25 00:50:08.456 Channel(/dev/video0): CheckChannel failed. > Please verify channel "69" in the "setup" Channel Editor. > 2005-11-25 00:50:08.457 Error, couldn't find any available channels. > 2005-11-25 00:50:08.457 Your database is most likely setup incorrectly. > > What I have installed is; > > MythTV 0.18.1-5 > lirc 0.7.2 > IVTV 0.4.0 > xmltv 0.5.40-1 > mysql-server 4.0.24-10 > Kernel 2.6.12-10-k7 > Hauppauge PVR-150 (Retail) > > No TV out card. This is a bedroom Pc/TV. > > Whatever I set as the 'default' channel is used and works when I watch > live TV - I just can't change to another channel. > > I'm in the UK and so I'm using xmltv. I only have five channels entered > into Mythtv as I've not got round to getting a 'sender' for my STB > downstairs. > > Can anyone give me a help with this one.
Go into the channel editor and make sure you have valid UK channel numbers for the 5 channels you have defined (i.e. between 20-69). E6 is I think a European channel number, which is why you are getting the error messages. I assume since you are getting some video, you currently have the Tuner0 configured against a video source (analog TV channels?) If you make sure you have the correct XMLTVIDs for each channel, you should be able to get listings too. Nick _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
