Yes, I did that for a minute ago and they appeared fine but still the terrible sound. Do you have any idea?
I also saw that tey are named "VIA DXS" not DMX :-) On 1/13/06, Brian Donaldson <[EMAIL PROTECTED]> wrote: > I was also missing the DMX controls (yes, four of them) until I installed > the latest version of alsa. I'm running Fedora so I did the following: > > # yum install alsa-kmdl-$KVER --KVER is the output of uname -r > # yum install alsa-driver > > The four DMX controls showed up in alsamixer after this install. > > -- > Brian > > On 1/13/06, Joacim J <[EMAIL PROTECTED]> wrote: > > > > On 1/13/06, Joacim J <[EMAIL PROTECTED]> wrote: > > > It's 5.1 and it should be the center that doesn't receive any signal. > > > Using Xine and have "Pass through" configured in Xine. Even if it > > > would be an old DVD with stereo sound the speach should go to the > > > front speakers, instead. > > > > > > I am at work right now but will test it some more when I soon arrive > > > home (it's friday 5.00 PM in sweden). Ok, since it's friday 13:th > > > today the machine will probably not even boot ;-) > > > > > > // Joacim > > > > > > > > > On 1/13/06, Steve Adeff <[EMAIL PROTECTED]> wrote: > > > > On Friday 13 January 2006 04:19, Joacim J wrote: > > > > > On 1/12/06, Steve Adeff < [EMAIL PROTECTED]> wrote: > > > > > > > > > http://www.mythtv.org/wiki/index.php/Asoundrc_alc850 > > > > > > > > > > I have put the configuration file in the mythtv home, disabled the > > > > > Sound System for mythtv user in FC4 by Control Center -> Sound & > > > > > Multimedia and uncheck the box and rebooted. > > > > > > > > > > When testing it with the famous DVD "Winnie the Poo" (to keep my > > > > > 2-years son happy) there was played music and such but no speach. I > > > > > have experienced this some other time in the past but can not > remember > > > > > the solution. > > > > > > > > > > Why does this happen and what should I do? > > > > > > > > > > -- > > > > > Regards > > > > > Joacim > > > > > > > > Is the DVD stereo or 5.1? It sounds like its 5.1 but your receiver > isn't > > > > picking up the center channel (where speach is usually placed). Why I > can't > > > > understand, since the asoundrc should (As it does with me) just pass > the > > > > audio stream from the dvd to your receiver. What are you using to > playback > > > > the DVD? I wonder if the software is doing something to the audio > stream... > > > > > > > > -- > > > > Steve > > > > I have now looked things up a bit. I have S/PDIF (coaxial) connected > > to my Harman/Kardon AVR-65, 5.1 receiver. Using Xine as player. > > > > When configuring Xine's audio as "Surround 5.1" I looses the speach > > (center), all other sound works fine. Switching Xine's config to "Pass > > through" I get a heavy cracking sound and no normal sound. Since I > > want a pure digital signal to my receiver I think I should use "Pass > > Through", or? > > > > One other thing I can see is that in alsamixer I don't have any DMX > > controls. I have had them (4 of them I think) in a previous > > installation. Shouldn't they be here? > > > > What can be wrong? > > > > Some configuration output: > > [EMAIL PROTECTED] ~]# more /etc/modprobe.conf > > alias eth0 sk98lin > > alias scsi_hostadapter sata_via > > alias scsi_hostadapter1 sata_promise > > > > alias snd-card-0 snd-via82xx > > install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx && > /usr/sbin/als > > actl restore >/dev/null 2>&1 || : > > remove snd-via82xx { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; > /sbin/mod > > probe -r --ignore-remove snd-via82xx > > > > #alias snd-card-0 snd-via82xx > > #options snd-card-0 index=0 > > #options snd-via82xx index=0 > > #remove snd-via82xx { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; > /sbin/ > > modprobe -r --ignore-remove snd-via82xx > > > > alias char-major-81 cx8800 > > alias usb-controller ehci-hcd > > alias usb-controller1 uhci-hcd > > alias ieee1394-controller ohci1394 > > # nvidia kernel module > > alias char-major-195 nvidia-1_0-8178 > > alias nvidia nvidia-1_0-8178 > > > > alias char-major-61 lirc_gpio > > [EMAIL PROTECTED] ~]# > > > ----------------------------------------------------------------------------------------- > > [EMAIL PROTECTED] ~]# more /home/mythtv/.asoundrc > > # Override the default output used by ALSA. > > # If you do not override the default, your default > > # device is identical to the (unmixed) analog device > > # shown below. If you prefer mixed and/or digital > > # output, uncomment the appropriate four lines below > > # (only one slave.pcm line). > > pcm.!default { > > type plug > > ## Uncomment the following to use mixed analog by default > > # slave.pcm "dmix-analog" > > ## Uncomment the following to use unmixed digital by default > > slave.pcm "digital" > > # slave.pcm "digital-hw" > > ## Uncomment the following to use mixed digital by default > > # slave.pcm "dmix-digital" > > } > > > > # Alias for analog output on the nForce2 (hw:0,0) > > # - This is identical to the device named "default"--which > > # always exists and refers to hw:0,0 (unless overridden) > > # - Therefore, we can specify "hw:0,0", "default", or "analog" > > # to access analog output on the nForce2 > > pcm.analog { > > type plug > > slave.pcm "analog-hw" > > } > > > > # Control device (mixer, etc.) for the nForce2 card > > ctl.analog { > > type hw > > card 0 > > } > > > > # Alias for (rate-converted) mixed analog output on the > > # nForce2 (hw:0,0) > > # - This will accept audio input--regardless of rate--and > > # convert to the rate required for the dmix plugin > > # (in this case 48000Hz) > > pcm.mixed-analog { > > type plug > > slave.pcm "dmix-analog" > > } > > > > # Control device (mixer, etc.) for the nForce2 card > > ctl.mixed-analog { > > type hw > > card 0 > > } > > > > # Alias for (rate-converted) digital (S/PDIF) output on the > > # nForce2 (hw:0,2) > > # - This will accept audio input--regardless of rate--and > > # convert to the rate required for the S/PDIF hardware > > # (in this case 48000Hz) > > pcm.digital { > > type plug > > slave.pcm "digital-hw" > > } > > > > # Control device (mixer, etc.) for the nForce2 card > > ctl.digital { > > type hw > > card 0 > > } > > > > # Alias for mixed (rate-converted) digital (S/PDIF) output on the > > # nForce2 (hw:0,2) > > # - This will accept audio input--regardless of rate--and > > # convert to the rate required for the S/PDIF hardware > > # (in this case 48000Hz) > > pcm.mixed-digital { > > type plug > > slave.pcm "dmix-digital" > > } > > > > # Control device (mixer, etc.) for the nForce2 card > > ctl.mixed-digital { > > type hw > > card 0 > > } > > > > # The following devices are not useful by themselves. They > > # require specific rates, channels, and formats. Therefore, > > # you probably do not want to use them directly. Instead use > > # of of the devices defined above. > > > > # Alias for analog output on the nForce2 (hw:0,0) > > # Do not use this directly--it requires specific rate, > > # channels, and format > > pcm.analog-hw { > > type hw > > card 0 > > # The default value for device is 0, so no need to specify > > } > > > > # Control device (mixer, etc.) for the nForce2 card > > ctl.analog-hw { > > type hw > > card 0 > > } > > > > # Alias for digital (S/PDIF) output on the nForce2 (hw:0,2) > > # Do not use this directly--it requires specific rate, > > # channels, and format > > pcm.digital-hw { > > type hw > > card 0 > > device 2 > > } > > > > # Control device (mixer, etc.) for the nForce2 card > > ctl.digital-hw { > > type hw > > card 0 > > } > > > > # Direct software mixing plugin for analog output on > > # the nForce2 (hw:0,0) > > # Do not use this directly--it requires specific rate, > > # channels, and format > > pcm.dmix-analog { > > type dmix > > ipc_key 1234 > > slave { > > pcm "analog-hw" > > period_time 0 > > period_size 1024 > > buffer_size 4096 > > rate 48000 > > } > > } > > > > # Control device (mixer, etc.) for the nForce2 card > > ctl.dmix-analog { > > type hw > > card 0 > > } > > > > # Direct software mixing plugin for digital (S/PDIF) output > > # on the nForce2 (hw:0,2) > > # Do not use this directly--it requires specific rate, > > # channels, and format > > pcm.dmix-digital { > > type dmix > > ipc_key 1235 > > slave { > > pcm "digital-hw" > > period_time 0 > > period_size 1024 > > buffer_size 4096 > > rate 48000 > > } > > } > > > > # Control device (mixer, etc.) for the nForce2 card > > ctl.dmix-digital { > > type hw > > card 0 > > } > > [EMAIL PROTECTED] ~]# > > > > > > -- > > Regards > > Joacim > > _______________________________________________ > > mythtv-users mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > -- Regards Joacim _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
