Brian Wood wrote: > On Jan 21, 2006, at 7:48 PM, Robert Tsai wrote: > > >> On Sat, Jan 21, 2006 at 05:44:40PM -0700, Brian Wood wrote: >> >>> On Jan 21, 2006, at 5:38 PM, Ben Holt wrote: >>> >>>> On 21/01/06, Brian Wood <[EMAIL PROTECTED]> wrote: >>>> >>>>> I know the sensors use the i2c bus, as do my Hauppauge cards. The >>>>> "sensor-detect" program seemed to want to activate the "sensors" >>>>> on the PVR cards (I said no). Is this a known problem and has >>>>> anybody had experience with it or perhaps even come up with a >>>>> fix? >>>>> >>>> I ran into this a while back and IIRC I read somewhere at the time >>>> that using lmsensors with ivtv causes conflicts. Removing >>>> lmsensors fixed the problem. No idea if that will change at any >>>> point in the future. >>>> >>> That's about what I had decided, but I've run into posts from folks >>> running lm_sensors with MythTV. I think that would have worked if >>> they had a mobo that used ISA access type sensors, but I'm not >>> ready to replace the motherboard just to measure temps. >>> >>> Guess I'll just continue putting my hand by the exhaust fan and >>> seeing how warm it feels :-) >>> >> I'm not sure how applicable this is, but I'm running lm-sensors just >> fine on my HD-3000 system. What if you compile all the sensor-related >> stuff as a loadable module, and then only load the modules you want, >> and don't load the sensor-related module for your PVR card? >> >> > Yeah, the HD-3000 doesn't use ivtv or i2c, so it makes sense that > you're working OK. What you suggest could probably be made to work, > although there might still be problems on the i2C bus. I guess if I > get a lot of free time I might play with it some more. > > Thanks for the suggestion, and the confirmation that it seems to be > only the i2c stuff that is causing problems. >
My problem was that it just wouldn't change the channel ever. It would record, just a bunch of stuff I didn't expect to see. I seem to remember lm_sensors showing the ivtv cards. You'd think there has to be a way to make it ignore the ivytv cards. And ivtv or mythtv ignore the other i2c devices if need be. -Mike _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
