Thanks John, this means in the worst case I can use my 5% resistors. I don't have 1K/1.2K SIP-10 resistors, but I do have enough 1.5K, do you think those would be OK too?
Sorry to bother with such newbie questions :-P On Monday, February 17, 2014 11:21:15 AM UTC+1, monahanz wrote: > > 1K or 1.2K's are fine. Dont have schematic in front of me but 1uF should > be fine also > John > > On Sunday, February 16, 2014 6:56:35 AM UTC-10, Fabio Battaglia wrote: > >> Hi everyone, >> I'm still waiting for the components I need to complete my Z80 V2 board >> (which are still one week away...), but I noticed I have almost everything >> I need for the 6502 V1 card ( >> http://s100computers.com/My%20System%20Pages/6502%20Board/Printing%20S100_6502-sch1.pdf) >> >> except two items, so I'm going on with this one. >> >> The first component I'm missing is the bunch of 1.3kOHM resistor >> networks, and can't find them for sale anywhere with reasonable shipping: I >> do have loads of 1k3, 5%, 0.25W resistors. Would 5% tolerance be OK if I >> build the networks myself? >> Second component is C5 capacitor on the output of the 7805 regulator: Is >> there any reason for it to be 1.2uF, or can I just go with the reccomended >> value in my regulator datasheet? >> >> Thanks! >> Fabio >> > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
