FWIW, that’s actually one of the “improvements” on the V2 version of that board.
http://s100computers.com/My%20System%20Pages/Z80%20Board/Z80%20CPU%20Board.htm#V2 Z80 CPU Board John From: [email protected] [mailto:[email protected]] On Behalf Of David Fry Sent: Friday, March 21, 2014 3:59 PM To: [email protected] Subject: Re: [N8VEM-S100:2842] Re: BASIC in ROM - Any Interest? Hi Neil, Just throwing an idea out there, how about modifying the Z80 board to permit ROM page flipping between two 8k pages of a 28C256 (pin 1 - A14 of the 28C256 would be pulled high so only the top half of the 28C256 would be used) to permit the possibilty of jumping to Basic from a Z80 monitor menu option. When you're finished you hit reset and you're back at the Z80 monitor then you can boot into CP/M or what ever. The Z80 monitor would need to be updated to remove it's current page flip operation but I think that might make a great all in one solution. regards David fry On Friday, March 21, 2014 8:01:44 PM UTC, nbreeden wrote: Update for 3/21 I've uploaded information on the modification I made to the V1 Z-80 CPU Card to allow a full 8K EPROM to be addressed, look in the 'Builder Journals' area under 'Neil B'. BASIC Interpreter update: 2 minor bugs have been fixed. The input and crunch buffer lengths have been increased from 80 to 160 bytes. I picked 160 as increasing the buffer size takes away free memory for the BASIC program to reside in. I've moved the hardware specific portions (the I/O interfaces) into separate files to make adding new interfaces easier.. The build environment has been updated to support multiple I/O modules. Support for the following I/O sub-systems has been coded: N8VEM Serial I/O USB Adapter - Tested N8VEM Setial I/O SCC1 - Untested N8VEM Setial I/O SCC2 - Untested N8VEM Utility Board UART (16550) - Tested - This provides a model for 16550/16450/8250 UARTs -Neil -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
