Neil - Andy mentioned that "the S-100 Z80 V2 CPU board is still pending some updates from Neil for compatibility with the new S-100 Utility board. " As I'm arranging a run of the Z80 V2 CPU card I was wondering if the card is all set, or will need any changes? We're pretty close to being ready to order.
Thanks! - Gary On Tue, Mar 25, 2014 at 1:34 PM, nbreeden <[email protected]> wrote: > Update for 3/25 > > - The last two show-stopper bugs have been fixed. Both of these were > actually east to fix once I finally understood them. > - The resolution to the issues was very interesting to me; it's > anyone's curious I can post info on them. > - My testing looks good. > - I've already documented the changes to the V1 CPU card required. > - I believe the V2 card can be jumpered to allow the same > configuration. > - The Serial I/O card has had the USB, SCC1 and SCC2 interfaces tested, > all three work as the console device. > - The Utility Card (MSX2) serial port can also be used as the console. > > I still need to: > - Document the jumper config on my 4MB memory card, the Serial I/O card > and the Utility card. > - Document how I build the ROM images and a description of the hardware > interface ASM files. > - Recruit a few alpha users - If you're interested let me know. > > -Neil > > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
