Dave not sure why your system is hanging without the ZFDC board. In the two systems I have here, one has the ZFDC board the other does not. I flip the CF cards around all the time. If the ZFDC board is not present I put out a warning "Failed to initialize the ZFDC Board" but then the loader continues on. If I pull the ZFDC board out on my main system, also no hang! Wish I could be of more help -- I'm so bogged down on other boards right now I can't get my head above water. I have one more week to do a lot then on a 3 week vacation (Grease, Turkey -- forget internet!). Want to try and get a few things completed before I go.
John -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of yoda Sent: Friday, June 20, 2014 8:38 PM To: [email protected] Subject: RE: [N8VEM-S100:4311] Another route to write a CPM3 image to a CF card for the S100 IDE board Yes but before you put the image on the CF card you can add/delete files with the cpmtools because they know the underlying CPM file system of the image. That is the beauty of this implementation. I would not put the floppies in the base images until you fix it so the system does not hang if the board is not detected. Dave -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
