Hi Dave, I have added replaced the CPM3.SYS file in your propeller non-banked image with the CPM3.SYS file I currently use in my system. Of course this will mean no second CF drive until you get your Propeller card up and working. The image is tested and working though. http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=CPM3-Disk-Images file is called cpm3nbprop.img regards David Fry
On Sunday, June 22, 2014 10:02:46 PM UTC+1, yoda wrote: > Hi David > > Thanks for quick check - I guess I wasn't lucky in making the changes > without the test - I will load a new one when I get my 374's and check out > the image. Could you in the meantime try using cpmcp and replace the > cpm3.sys in the image and see if it boots. If it does could you stick it > in the directory so people could make some progress while I am waiting on > chips. > > Sounds like a good idea on the highlighting of the code. I have a > combined HIDE3.ASM now that you can specify the BANKED parameter at the top > so we have only one file that can be used. > > Dave > > On Sunday, June 22, 2014 3:35:53 PM UTC-5, David Fry wrote: >> >> Hi Dave, >> >> I have just checked both your CP/M3 images for the propeller console and >> neither of them get to a command prompt, CPMLDR banner comes up followed by >> the BIOS3 and BDOS3 headings and 38K TPA then nothing, would suggest a >> recheck of CPM3.SYS file >> >> When you do your documentation on the builds is there any chance you >> could highlight the code you have changed in bold or italics, might help >> speed up the learning process on how you configured the second CF drive to >> drive B. >> >> hoping to have my documentation completed in the next couple of days. >> >> regards >> >> David Fry >> On Sunday, June 22, 2014 8:42:01 PM UTC+1, yoda wrote: >> >>> I have uploaded the basic images and a short document on how to put >>> these on a CF card with all the necessary tools included. The link is >>> http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=CPM3-Disk-Images >>> >>> >>> I have also included modified cpmtools that understand the disk format >>> so you can manipulate the images before writing them to a CF card. I >>> would like to use this thread for questions and suggestions for the >>> documentation. I have not verified the prop images as I did not have any >>> 74LS374's on hand so I could not finish bringing up my prop console board - >>> should be able to do that by the coming weekend. I assume a lot of you can >>> verify whether they work or not. I believe they should. I have verified >>> the serial ones do work. >>> >>> I am opening another thread for suggestions for going forward. I want >>> to cover how to build and customize the actual cpmldr and cpm3.sys files. >>> I will leverage a lot of what John has done and David Fry will contribute >>> his work on the LBA addressing changes that made this all work. >>> >>> Let me know how it goes. >>> >>> Dave >>> >> -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
