Hi David Thanks - at least folks can get up running now - I should be able to diagnose the problem fairly quickly once I have my prop console up and running.
Dave On Sunday, June 22, 2014 5:00:06 PM UTC-5, David Fry wrote: > > Hi Dave, > > I have added replaced the CPM3.SYS file in your propeller non-banked image > with the CPM3.SYS file I currently use in my system. > Of course this will mean no second CF drive until you get your Propeller > card up and working. The image is tested and working though. > > > http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=CPM3-Disk-Images > > file is called cpm3nbprop.img > > regards > > David Fry > > > On Sunday, June 22, 2014 10:02:46 PM UTC+1, yoda wrote: > >> Hi David >> >> Thanks for quick check - I guess I wasn't lucky in making the changes >> without the test - I will load a new one when I get my 374's and check out >> the image. Could you in the meantime try using cpmcp and replace the >> cpm3.sys in the image and see if it boots. If it does could you stick it >> in the directory so people could make some progress while I am waiting on >> chips. >> >> Sounds like a good idea on the highlighting of the code. I have a >> combined HIDE3.ASM now that you can specify the BANKED parameter at the top >> so we have only one file that can be used. >> >> Dave >> >> On Sunday, June 22, 2014 3:35:53 PM UTC-5, David Fry wrote: >>> >>> Hi Dave, >>> >>> I have just checked both your CP/M3 images for the propeller console and >>> neither of them get to a command prompt, CPMLDR banner comes up followed by >>> the BIOS3 and BDOS3 headings and 38K TPA then nothing, would suggest a >>> recheck of CPM3.SYS file >>> >>> When you do your documentation on the builds is there any chance you >>> could highlight the code you have changed in bold or italics, might help >>> speed up the learning process on how you configured the second CF drive to >>> drive B. >>> >>> hoping to have my documentation completed in the next couple of days. >>> >>> regards >>> >>> David Fry >>> On Sunday, June 22, 2014 8:42:01 PM UTC+1, yoda wrote: >>> >>>> I have uploaded the basic images and a short document on how to put >>>> these on a CF card with all the necessary tools included. The link is >>>> http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=CPM3-Disk-Images >>>> >>>> >>>> I have also included modified cpmtools that understand the disk format >>>> so you can manipulate the images before writing them to a CF card. I >>>> would like to use this thread for questions and suggestions for the >>>> documentation. I have not verified the prop images as I did not have any >>>> 74LS374's on hand so I could not finish bringing up my prop console board >>>> - >>>> should be able to do that by the coming weekend. I assume a lot of you >>>> can >>>> verify whether they work or not. I believe they should. I have verified >>>> the serial ones do work. >>>> >>>> I am opening another thread for suggestions for going forward. I want >>>> to cover how to build and customize the actual cpmldr and cpm3.sys files. >>>> I will leverage a lot of what John has done and David Fry will contribute >>>> his work on the LBA addressing changes that made this all work. >>>> >>>> Let me know how it goes. >>>> >>>> Dave >>>> >>> -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
