I have no luck with the floppy utilities from the "X" PC-BIOS (8086 Monitor 10.32). >From the ZFDCDIAG program all is working fine and i can read the real data from the 3,5" MS-DOS floppy. All other functions like seeking, formatting and R/W tests are all work fine. But every access to the ZFDC controller from within the PC-BIOS shows only like this:
*Booting MS-DOS from 5" Floppy Disk* *Initilizing 8259A PIC (Port 20H, Ints 0 & 1 only)* *ZFDC Board Initilize OK* *Floppy Sector Read Error. Error returned = 3DH* *Boot sector read on floppy drive failed. * This 3DH error appears from all floppy related functions. My configuration at the moment: Z80 CPU V2 with V5.02 monitor. 6MHz 80286 Master Slave CPU card. 6mhz V2 MS-DOS Support board with V10.32 monitor in EEPROMs. 4mb SRAM board, 1MB populated System Monitor Board V2 ZFDC Floppy controller CompuPro Interfacer1 I/O board wired as an Prop I/O board. Dual IDE Board with CP/M 3.0 - "Yoda" CPM 3 image incl. Z-rtc.com Frank -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
