Frank , no MSDOS Version. I use MS version 4.01 on disks (unmodified, i.e. formatted on an old PC using the /s option). Earlier versions are OK but not later versions.
John From: [email protected] [mailto:[email protected]] On Behalf Of Frank Schieschke Sent: Tuesday, July 29, 2014 11:38 PM To: [email protected] Subject: [N8VEM-S100:4744] Re: ZFDC Controller under control of the PC-BIOS?? As i mention earlier, under ZFDCDIAG all functions of the controller and drives are available without any error. Today morning i jumper the 80286 board to a single master, so the the Z80 is out off the system. This shows the same behavior as prior with the Z80. Booting from the CF-Card working already fine. Is there a MS-DOS version of the ZFDCDIAG program ? Is the version of MS_DOS which is on the 3.5" disk important for booting? Frank -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
