Hi John! For these and other boards, please update the EDA file sets on the wiki with the current designs so that other builders can use them.
Thanks! Andrew Lynch ________________________________ From: monahanz <[email protected]> To: [email protected] Sent: Tuesday, November 18, 2014 12:56 PM Subject: [N8VEM-S100:5624] Status of new S100 Boards. Just a status update on the new VDP Video Board, ISA to S100 Bus converter board and 16MB S100 static RAM board... The VDP board (http://s100computers.com/My%20System%20Pages/VDP%20Video%20Board/VDP%20Board.htm) checks out fine. I'm still trying to locate suitable small speakers for the board. Unfortunately I have run into problems with the ISA to S100 bus converter board http://s100computers.com/My%20System%20Pages/ISA%20to%20S100%20Bus/ISA%20To%20S-100%20Bus%20Board.htm It works fine with our 8088 board but not so for 16 bit writes (8086 board). I'm a bit baffled since the prototype worked fine. I did a few small changes, clearly one not so small! May have to do it again! The 16 MB Static RAM board boards http://s100computers.com/My%20System%20Pages/16M%20RAM%20Board/16MG%20RAM%20Board.htm (bottom of page) just came in from China (PCBcart). I have not checked them out yet, but look nice. That's the good news, the bad news is I am going on vacation and will not be able to do any more work until the beginning of next month. Since many/most have ordered multiple boards I will hold everything until all 3 are ready unless somebody wants one immediately. John -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
