Thanks John! Andrew Lynch
________________________________ From: John Monahan <[email protected]> To: [email protected] Sent: Tuesday, November 18, 2014 9:17 PM Subject: RE: [N8VEM-S100:5628] Status of new S100 Boards. Hi Andrew, been a while! I have updated the wiki with the kiCAD and Gerber files for:- VDP board 16MB SRAM board with SMD RAM chips The final 80386 Board A special version of its 32/64 MB daughter SRAM board soldering the SMD chips directly to the board. My first prototype 80486 master/slave CPU board. I have not yet put up the ISA->S100 bus converter or S100 bus VGA boards because (no surprise), I’m still having problems with them. I also need to update the S100Computers web site on some of these. So much to do …so little time! John From:[email protected] [mailto:[email protected]] Sent: Tuesday, November 18, 2014 4:06 PM To: [email protected] Subject: Re: [N8VEM-S100:5626] Status of new S100 Boards. Hi John! For these and other boards, please update the EDA file sets on the wiki with the current designs so that other builders can use them. Thanks! Andrew Lynch From:monahanz <[email protected]> To: [email protected] Sent: Tuesday, November 18, 2014 12:56 PM Subject: [N8VEM-S100:5624] Status of new S100 Boards. Just a status update on the new VDP Video Board, ISA to S100 Bus converter board and 16MB S100 static RAM board... The VDP board (http://s100computers.com/My%20System%20Pages/VDP%20Video%20Board/VDP%20Board.htm) checks out fine. I'm still trying to locate suitable small speakers for the board. Unfortunately I have run into problems with the ISA to S100 bus converter board http://s100computers.com/My%20System%20Pages/ISA%20to%20S100%20Bus/ISA%20To%20S-100%20Bus%20Board.htm It works fine with our 8088 board but not so for 16 bit writes (8086 board). I'm a bit baffled since the prototype worked fine. I did a few small changes, clearly one not so small! May have to do it again! The 16 MB Static RAM board boards http://s100computers.com/My%20System%20Pages/16M%20RAM%20Board/16MG%20RAM%20Board.htm (bottom of page) just came in from China (PCBcart). I have not checked them out yet, but look nice. That's the good news, the bad news is I am going on vacation and will not be able to do any more work until the beginning of next month. Since many/most have ordered multiple boards I will hold everything until all 3 are ready unless somebody wants one immediately. John -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
