All ‹ I finished building the ZFDC and I have a question about the codes on the displays. Part of the test procedure says that you should see ³3² in the right-most digit. Then, you replace the test ROM with the firmware and the two left digits should count to FF and roll-over (they do) but the remaining three should all have ³0². On mine, the last digit still shows ³3².
What does this mean? I still have to get the test program running and to pull an 8² drive from the attic, but I¹m wondering if this is significant in some way. Thanks! Rich -- Rich Cini Collector of Classic Computers Build Master and lead engineer, Altair32 Emulator http://www.classiccmp.org/cini http://www.classiccmp.org/altair32 -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
