Ok, that's good. I looked at it quickly and I saw the console at the top but I haven't hunted to see what's buried further down in the code.
It's probably worth making them CP/M-independent since you don't always know what order someone is going to build boards or populate a system. Let me see what I can do. Sent from my iPhone > On Nov 21, 2014, at 2:10 PM, John Monahan <[email protected]> wrote: > > It's been a long time bit the way I remember those its easy to modify the > code so the I/O is via the monitor. I think the appropriate routines are all > at the start. > > John > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Thomas Owen > Sent: Friday, November 21, 2014 9:45 AM > To: [email protected] > Subject: Re: [N8VEM-S100:5652] Re: ZFDC TIL31 DISP9 code meanings > > Hello Rich, > The only versions of ZFDCDIAG and ZFORMAT I have seen required CPM. I have > the IDE CF board in my system as A and B and boot CPM from there, with the > ZFDC drives as C and D. > > Good luck, > Thomas > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
