Rich, I’m back in CA . Did you get that RAM/ROM board version number straightened out?
John From: [email protected] [mailto:[email protected]] On Behalf Of monahanz Sent: Saturday, November 22, 2014 2:22 PM To: [email protected] Subject: [N8VEM-S100:5659] Re: EPROM/RAM board The problem Rich is I'm in Paris currently and am working from memory. Will not be back in CA until Dec 1st but it sounds like you are correct. I will review the files when I get back. John On Friday, November 21, 2014 7:56:53 PM UTC-8, AltairManRich wrote: All — I was going to build the EPROM/RAM board this weekend but I noticed that there are several versions of the board. Mine says “4213” by the UL designation in the upper-left corner and has “Version 01” in the lower-right corner. It also has a coin cell battery holder on it. This version doesn’t match any of the pictures on the Web site so before I built it, I wanted to confirm it was a good version. If not, I guess I should get another one from Ed Snider (I think). Thanks! Rich -- Rich Cini Collector of Classic Computers Build Master and lead engineer, Altair32 Emulator http://www.classiccmp.org/cini http://www.classiccmp.org/altair32 -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
