Rich I have added the schematic for that board at the bottom of this page:- http://s100computers.com/My%20System%20Pages/RAM+ROM%20Board/RAM+PROM%20Board.htm
I just noticed I don't have the original Gerber files. I will see if Andrew has them. John On Friday, November 21, 2014 7:56:53 PM UTC-8, AltairManRich wrote: > All — > > I was going to build the EPROM/RAM board this weekend but I noticed that > there are several versions of the board. Mine says “4213” by the UL > designation in the upper-left corner and has “Version 01” in the > lower-right corner. It also has a coin cell battery holder on it. > > This version doesn’t match any of the pictures on the Web site so before I > built it, I wanted to confirm it was a good version. If not, I guess I > should get another one from Ed Snider (I think). > > Thanks! > > Rich > > -- > Rich Cini > Collector of Classic Computers > Build Master and lead engineer, Altair32 Emulator > http://www.classiccmp.org/cini > http://www.classiccmp.org/altair32 > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
