Great job, Don! Can't wait to complete mine. I'll surely buy a couple of V2 when you'll complete them.
Thanks, Fabio On Dec 11, 2014 10:17 AM, "Don Caprio" <[email protected]> wrote: > > *Attention FP Mini builders * > > All switch orders have been shipped today. I apologize for the > delay in shipping. Year end crunch at the office and labor > involved in putting these shipments together got the best of me. > > I had nearly 1000 switches to sort through, count, recount, and > package. I did my best to get orders correct. If you find extra > switches or are missing some please let me know. I have a nagging > fear a couple could have got mixed up. Joe got Sam's order and > vis-versa. > > If you've been watching the Wiki, I do regret that the RUN and HALT > LED's got swapped. You have two choices here. Change the silkscreen, > or wait for a fix. I attempted some jump and cut and borked my > board. Luckly I was able to restore and got it operational again. I do > have > a fix that does not require cuts and jumpers. It's a bit cheesy so I'm > reluctant to share at this point. Basicaly involves placing tape over the > component holes and using the long LED leads to reach the proper holes. > > I am planning on a V2 board. It will have the LED fix, all jumpers moved > to a dip switch on top of the board and line drivers for the S100 bus > signals > which should allow the board to run better at higher speeds. It's going to > be > tricky finding real estate for the extra components, but I'm up for the > challenge. > > Thank you all for supporting this project. > > Here is a list of folks who were shipped switches. If you ordered some and > your name is not on the list please contact me. > > > Josh Bensadon > Richard Cini > Fabio Battaglia > John Monahan > Leonard Young > Pete Plank > Leon Byles > Robert Greenstreet > Nik Brisevac > Jack Rubin > Edward Snider > James Cobb > Andrew Kwan > Neil Breeden > Matt Turner > Malcolm Macleod > Kenneth Robbins > Andrew Bingham > Richard Bromagem > Todd Goodman > Paul Birkel > Gary Kaufman > Gregory Beat > Ian McLaughlin > > -- > Don [email protected] > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
