On Thursday, February 26, 2015 at 6:19:55 PM UTC-7, litterbox99 wrote: > > Josh, > > > I found the Zork 1-3 files, D: was blank, but I found nothing > on the X-modem. Also I can't get zork to load... I can switch > to the drive, but when I type ZORKx it just loads from the SD and > drops to the prompt. > > I happened to be experimenting with a disk image made from the v1.2 ROM/Bios today on my system running a v2.3 ROM/Bios. It was behaving oddly. I remember reading about Zork loading oddly in a thread so I tried Zork and it behaved as described above. Powered down changed jumpers, put the original v1.2 ROM in the board with the SD card as delivered. I ran zork in this configuration fine. Then I re-installed the v2.3 ROM and carefully made a new boot disk from the "FIRMWARE and CPM V-Disk Images AIR-V23.zip" file. Zork did not run. Also LS hung the system consistently as did some other files on A:. Stat ran fine consistently.
Are other folks running v2.3 ROM and bios ok? Perhaps check their A:LS and c:zork3 - jeffa -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
