Opp’s Dave, have corrected. John
From: [email protected] [mailto:[email protected]] On Behalf Of David Fry Sent: Friday, March 13, 2015 5:55 PM To: [email protected] Subject: [N8VEM-S100:6528] Re: The S100 Bus XVGA video board has arrived. Hi John, you seem to have me on that list twice totalling 5 pcb's ?? Please can you correct your list as my original pledge was for 2 pcb's best regards David Fry On Saturday, March 14, 2015 at 12:33:59 AM UTC, monahanz wrote: I'm delighted to report our S100 XVGA video board arrived back from PCBcart (China). I assembled one and find that it is working as best I can tell with no problems. I have written up a report that can be seen here:- <http://s100computers.com/My%20System%20Pages/VGA%20Board/VGA%20Board.htm> http://s100computers.com/My%20System%20Pages/VGA%20Board/VGA%20Board.htm The build is fairly simple and can be found at the bottom of the page. There are four 22V10 GAL’s on this board. The GAL source code and .JED files are supplied as well. Programming these GALs requires a ROM/GAL programmer. I recommend the Wellon VP290. If people don’t have or want one, I will “burn” their GAL’s for them. However I really recommend you get a GAL burner. Most of the future S100 boards in the works use one or two GAL’s. Remember currently this board will only work with our 8 bit 8088 CPU board. I’m hoping I can also get it to work with an 80486 board and possibly a V2 version of our 80386. It will not work with the current versions of the 8086 or 80286 boards. The 8088 is currently running with its onboard clock at 24MHz (8 MH bus PHI signal). Here is the list I am working from:- Peter Cole 1 VGA (+ 1 VDP) Andrew Bingham 1 Robert Greenstreet 1 Brian Marstella 1 David Fry 2 Elsid 1 Matthew Turner 2 Todd Goodman 3 Gary Kaufman 2 Paul Birkel 1 David Fry 3 nbreeden 1 Jedi Master 1 Any errors omissions please let me know. I will ship out hopefully Monday. Cost will be $15 per board + shipping. When you receive your board, look at the postage charge, and PayPal me the total amount. I have only 2 board left, if anybody did not make the list. John -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
