Thanks Matt, I appreciate! Apparently David Fry was assigned 3x boards too many, if I understood correctly (5 instead of 2), so maybe there are still spares. Let's see what John says.
Fabio Battaglia On Mar 14, 2015 2:29 PM, "Matthew Turner" <[email protected]> wrote: > Looking at the last 9 emails this morning, it appears that all the extras > are used up. If that's the case, I can give up one of my boards for Fabio > to get on the list. I usually order an extra board anyway, and no point > shipping it to Canada so that I can ship to Italy. > > Matt Turner > > ------------------------------ > Date: Fri, 13 Mar 2015 17:33:59 -0700 > From: [email protected] > To: [email protected] > Subject: [N8VEM-S100:6527] The S100 Bus XVGA video board has arrived. > > I'm delighted to report our S100 XVGA video board arrived back from > PCBcart (China). I assembled one and find that it is working as best I > can tell with no problems. I have written up a report that can be seen > here:- > > *http://s100computers.com/My%20System%20Pages/VGA%20Board/VGA%20Board.htm* > <http://s100computers.com/My%20System%20Pages/VGA%20Board/VGA%20Board.htm> > > The build is fairly simple and can be found at the bottom of the page. > There are four 22V10 GAL's on this board. The GAL source code and .JED > files are supplied as well. Programming these GALs requires a ROM/GAL > programmer. I recommend the Wellon VP290. If people don't have or want > one, I will "burn" their GAL's for them. However I really recommend you get > a GAL burner. Most of the future S100 boards in the works use one or two > GAL's. > > Remember currently this board will only work with our 8 bit 8088 CPU > board. I'm hoping I can also get it to work with an 80486 board and > possibly a V2 version of our 80386. It will not work with the current > versions of the 8086 or 80286 boards. The 8088 is currently running with > its onboard clock at 24MHz (8 MH bus PHI signal). > > Here is the list I am working from:- > > Peter Cole 1 VGA (+ 1 VDP) > Andrew Bingham 1 > Robert Greenstreet 1 > Brian Marstella 1 > David Fry 2 > Elsid 1 > Matthew Turner 2 > Todd Goodman 3 > Gary Kaufman 2 > Paul Birkel 1 > David Fry 3 > nbreeden 1 > Jedi Master 1 > > Any errors omissions please let me know. I will ship out hopefully > Monday. Cost will be $15 per board + shipping. *When* you receive your > board, look at the postage charge, and PayPal me the total amount. > > I have only 2 board left, if anybody did not make the list. > > John > > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
