Thanks Josh, I made up a simple MBASIC routine to evaluate some of the VT100 codes. For example to print a character in BOLD you issue the command ESC[1m. In BASIC this is PRINT CHR$(27);"[";"1";"m"; : PRINT "BOLD"
When I try this I don't get a bold character but reverse video! I am basing this result on the fact that I can run a terminal program also, so I have two screen outputs to look at. My terminal program is TeraTerm set to VT100. Also I looked online for the VT100 codes. The codes that I am trying to get are: ESC[1m bold ESC[4m underline ESC[5m blinking I can actually follow the state sequence in VT100_Emulator-2.spin, but I get lost after state 4 and can't find where the final character "m" leads to. Any help would be great Harold On Friday, March 13, 2015 at 11:07:38 AM UTC-4, [email protected] wrote: > Hi all, > > Just finished the propeller console IO board and I have it running with > the 8080A CPU board with Josh's rev 2.4 ROM. I downloaded the firmware to > run the screen and keyboard as a VT100 terminal. That works pretty well but > some of the ESC codes for screen control don't work. Has anyone done any > more programming through Parallax on the .spin programs? > > Just curious. > > Thanks, > Harold > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
